BUBBFIL SPINNING FOR FABRICATION OF PVA NANOFIBERS

Abstract

Bubbfil spinning is used to fabricate PVA nanofibers. Multiple polymer bubbles are formed on the spinneret, and an external force is added to burst the bubbles immediately. The ejected jets are accelerated to a high velocity, and fiber diameter is tenable by adjusting the spinning parameters.

Dates

  • Submission Date2015-04-13
  • Revision Date2015-04-14
  • Acceptance Date2015-04-15
  • Online Date2015-05-03

DOI Reference

10.2298/TSCI150413061H

References

  1. Chen, R.X., et al., Mini-review on Bubbfil spinning process for mass-production of nanofibers. Matéria (Rio de Janeiro), Vol. 19, No. 4, 2014 , pp. 325-343
  2. Chen, R.X., et al., Bubbfil spinning for mass-production of nanofibers, Thermal Science, Vol.19, No.5, 2014, pp.1718-1719
  3. He, J.H., et al., Review on fiber morphology obtained by bubble electrospinning and blown bubble spinning, Thermal Science, Vol. 16, No. 5, 2012, pp.1263-1279
  4. Chen, R.X., et al., Mechanism of nanofiber crimp, Thermal Science, Vol. 17, No.5,2013, pp.1473-1477
  5. Liu, F.J., et al., Fabrication of nanoporous fibers via bubble electrospinning, Thermal Science, Vol. 18, No.5, 2014, pp. 1455-1458
  6. Dou, H., et al., Blown bubble-spinning for fabrication of superfine fibers", Thermal Science,V. 16,no.5, , 2012, pp.1465-1466
  7. Dou,H., et al., Blown bubble-spinning and micro yarns", Bubbfil Nanotechnology, Vol. 1, No.1,2014, pp. 24-28
  8. Kong, H.Y., et al., Polymer liquid membrane for nanofiber fabrication", Thermal Science, V. 17, No. 5, 2013, pp. 1479-1482
  9. Kong, H.Y., He,J.H., A Modified Bubble Electrospinning for Fabrication of Nanofibers, Journal of Nano Research, Vol. 23, 2013, pp. 125-128
  10. Chen, R.-X., On Surface Tension of a Bubble under Presence of electrostatic force, Thermal Science, Vol. 19, No.1,2015, pp.353-355
  11. Chen, R.X., Burst of a fast axially moving micro/nano jet , Bubbfil Nanotechnology, Vol.. 1, No. 1, 2014, pp.13-23, 2014
  12. Li, Z.B.,et al., On air blowing direction in the blown bubble-spinning, Matéria (Rio de Janeiro), Vol. 19, No. 4, 2014 ,pp. 345-349
  13. Li, Y., et al., Comparison between Electrospun and Bubbfil-spun Polyether Sulfone Fibers, Matéria (Rio de Janeiro), Vol. 19, No. 4, 2014 ,pp.363-369
  14. Li, Z.B.,He,J.H., When nanotechnology meets filteration: From nanofiber fabrication to biomimetic design, Matéria (Rio de Janeiro), 2014, 19(4),I-III.