EFFECTS OF PISTON SPEED, COMPRESSION RATIO AND CYLINDER GEOMETRY ON SYSTEM PERFORMANCE OF A LIQUID PISTON

Abstract

Energy storage systems are being more important to compensate irregularities of renewable energy sources and yields more profitable to invest. Compressed air energy storage (CAES) systems provide sufficient of system usability, then large scale plants are found around the world. The compression process is the most critical part of these systems and different designs must be developed to improve efficiency such as liquid piston. In this study, a liquid piston is analyzed with CFD tools to look into the effect of piston speed, compression ratio and cylinder geometry on compression efficiency and required work. It is found that, increasing piston speeds do not affect the piston work but efficiency decreases. Piston work remains constant at higher than 0.05 m/s piston speeds but the efficiency decreases from 90.9 % to 74.6 %. Using variable piston speeds has not a significant improvement on the system performance. It is seen that, the effect of compression ratio is increasing with high piston speeds. The required power, when the compression ratio is 80, is 2.39 times greater than the power when the compression ratio is 5 at 0.01 m/s piston speed and 2.87 times greater at 0.15 m/s. Cylinder geometry is also very important because, efficiency, power and work alter by L/D, D and cylinder volume respectively.

Keywords

Dates

  • Submission Date2014-09-26
  • Revision Date2014-11-24
  • Acceptance Date2014-11-28
  • Online Date2014-12-28

DOI Reference

10.2298/TSCI140926146M

References

  1. Pickard,W. F., et. al., Can Large-Scale Advanced-Adiabatic Compressed Air Energy Storage Be Justified Economically in an Age of Sustainable Energy?, Journal of Renewable and Sustainable Energy, 1 (2009), 033102-1: 033102-10
  2. Kim, Y. M., Novel Concepts of Compressed Air Energy Storage and Thermo-Electric Energy Storage, Ph.D. thesis, Swiss Federal Institute of Technology in Lausanne, Lausanne, Switzerland, 2012
  3. Steta, F. S., Modeling of an Advanced Adiabatic Compressed Air Energy Storage (AA-CAES) Unit and an Optimal Model-Based Operation Strategy for Its Integration into Power Markets. M.Sc. Thesis, Swiss Federal Institute of Technology, Zurich, Switzerland, 2010
  4. Zunft, S. et. al., Adiabatic Compressed Air Energy Storage for the Grid Integration of Wind Power, Proceedings, 6th International Workshop on Large-Scale Integration of Wind Power and Transmission Networks for Offshore Windfarms, Delft, Netherlands, 2006
  5. Bullough, C., et. al., Advanced Adiabatic Compressed Air Energy Storage for the Integration of Wind Energy. Proceedings, European Wind Energy Conference, London, UK, 2004
  6. Saniel D. et. al., Conceptual design of ocean compressed air energy storage system, compressed air energy storage system, Proceedings, Oceans, Hampton Roads, USA, 2012
  7. Kim, Y. M., et. al., Potential and Evolution of Compressed Air Energy Storage: Energy and Exergy Analyses, Entropy, 14 (2012) pp.1501 - 1521
  8. Foley A., Lobera, I. D., Impacts of Compressed Air Energy Storage Plant on an Electricity Market with a Large Renewable Energy Portfolio, Energy, 57 (2013) pp.85 - 94
  9. ***, SustainX, www.sustainx.com/technology-isothermal-caes.htm
  10. ***, Enairys Powertech Ltd, www.enairys.com/en/products/technology
  11. Saadat, M., et. al., Optimal Trajectories for a Liquid Piston Compressor/Expander in a Compressed Air Energy Storage System with Consideration of Heat Transfer and Friction, Proceedings, American Control Conference, Montréal, Canada, 2012
  12. Zhang, C., et. al., Heat Transfer in a Long, Thin Tube Section of an Air Compressor: An Empirical Correlation from CFD and a Thermodynamic Modeling, Proceedings, International Mechanical Engineering Congress & Exposition, Houston, USA, 2012
  13. Van de Ven, J. D., Li, P. Y., Liquid Piston Gas Compression, Applied Energy, 86 (2009) pp.2183-2191
  14. Lemofouet, S., Investigation and Optimisation of Hybrid Electricity Storage Systems Based on Compressed Air and Supercapacitors, Ph.D. thesis, Swiss Federal Institute of Technology in Lausanne, Lausanne, Switzerland, 2006
  15. Lemofouet, S., Rufer, A., A Hybrid Energy Storage System Based on Compressed Air and Supercapacitors with Maximum Efficiency Point Tracking (MEPT), IEEE Transactions on Industrial Electronics, 53, (2006) 4, pp.1105 - 1115
  16. Simon, T., Li, P., Compression/expansion within a cylinder chamber: Application of a liquid piston and various porous inserts, M.Sc. thesis, University of Minnesota, Minneapolis, USA, 2013
  17. Çengel, Y. A., Boles, M. A., Thermodynamics: An engineering Approach, McGraw-Hill, Boston, USA, 1994
  18. Ansys Fluent 13.0 Tutorial Guide, Ansys Inc. 2011