AN EXPERIMENTAL INVESTIGATION OF PERFORMANCE OF A DOUBLE PASS SOLAR AIR HEATER WITH THERMAL STORAGE MEDIUM

Abstract

The performance of a double pass solar air heater was experimentally investigated using four different configurations. First configuration contained only absorber plate whereas copper tubes filled with thermal storage medium (paraffin wax) were added on the absorber plate in the second configuration. Aluminum and steel rods as thermal enhancer were inserted in the middle of paraffin wax of each tube for configurations three and four respectively. Second configuration provided useful heat for about 1.5 hours after the sunset compared to first configuration. Configurations three and four provided useful heat for about 2 hours after the sunset. The maximum efficiency of about 96% was achieved using configuration three (i.e. using Aluminum rods in the middle of copper tubes filled with paraffin wax).

Dates

  • Submission Date2014-08-24
  • Revision Date2014-11-11
  • Acceptance Date2014-11-12
  • Online Date2014-12-14

DOI Reference

10.2298/TSCI140824140A

References

  1. Krishnananth, S. S. and Murugavel, K. K., "Experimental study on double pass solar air heater with thermal energy storage", Journal of King Saud University-Engineering Sciences, Vol.25 (2013), pp.135- 140
  2. Fath, H. E. S., "Thermal performance of a simple design solar air heater with built-in thermal energy storage system", Energy Conversion & Management, Vol.36, No. 10 (1995), pp.989-997
  3. Velmuruganl, P. and Kalaivanan, R., "Evaluation of thermal performance of wire mesh solar air heater", Indian Journal of Science and Technology, Vol.4, No.1 (2011), pp.12-14
  4. Yeh, H-M. and Ting, Y-C., "Effects of free convection on collector efficiencies of solar air heaters", Applied Energy, Vol.22 (1986), pp.145-155
  5. Prasad, S. B., Saini, J. S. and Singh, K. M., "Investigation of heat transfer and friction characteristics of packed bed solar air heater using wire mesh as packing material", Solar Energy, Vol.83 (2009), pp.773- 783
  6. Akpinar, E. K. and Koçyiğit, F., "Experimental investigation of thermal performance of solar air heater having different obstacles on absorber plates", International Communications in Heat and Mass Transfer, Vol.37 (2010), pp.416-421
  7. Hernández, A. L. and Quiñonez, J. E., "Analytical models of thermal performance of solar air heaters of double-parallel flow and double-pass counter flow", Renewable Energy, Vol.55 (2013), pp.380-391
  8. Sharma, S. P., Saini, J. S. and Varma, H. K., "Thermal performance of packed-bed solar air heaters", Solar Energy, Vol.47, No.2 (1991), pp.59-67
  9. El-Sebaii, A. A. and Al-Snani, H., "Effect of selective coating on thermal performance of flat plate solar air heaters", Energy, Vol.35 (2010), pp.1820-1828
  10. Naphon, P., "Effect of porous media on the performance of the double-pass flat plate solar air heater", International Communications in Heat and Mass Transfer, Vol.32 (2005), pp.140-150
  11. Demireli, Y. and Kun, S., "Thermal performance study of a solar air heater with packed flow passage", Energy Conversion and Management, Vol.27, No. 3 (1987), pp. 317-325
  12. Bhargava, A. K. and Rizzi, G., "A solar air heater with variable flow passage width", Energy Conversion and Management, Vol.30, No. 4 (1990), pp.329-332
  13. Garg, H. P., Datta, G. and Bandyopadhyay, B., "A study on the effect of enhanced heat transfer area in solar air heaters", Energy Conversion and Management, Vol.23, No.1 (1983), pp.43-49
  14. Indrajit., Bansal, N. K. and Garg, H. P., "An experimental study on a finned type and non-porous type solar air heater with a solar simulator", Energy Conversion and Management, Vol.25, No.2 (1985), pp.135-138
  15. El-khawajah , M. F., Aldabbagh, L. B. Y. and Egelioglu, F., "The effect of using transverse fins on a double pass flow solar air heater using wire mesh as an absorber", Solar Energy, Vol.85 (2011), pp.1479- 1487
  16. Omojaro, A. P. and Aldabbagh, L. B. Y., "Experimental performance of single and double pass solar air heater with fins and steel wire mesh as absorber", Applied Energy, Vol.87 (2010), pp.3759-3765
  17. Mohammadi, K. and Sabzpooshani, M., "Comprehensive performance evaluation and parametric studies of single pass solar air heater with fins and baffles attached over the absorber plate", Energy, Vol.57 (2013), pp.741-750
  18. Wijeysundera, N. E., Ah, L. L. and Tjioe, L. E., "Thermal performance study of two-pass solar air heaters", Solar Energy, Vol.28, No. 5 (1982), pp.363-370
  19. Badescu, V., "The dependence of solar air heater performance upon tilt and orientation", Energy Conversion & Management, Vol.30, No. 2 (1990), pp.179-185
  20. Ho, C-D., Lin, C-S., Chuang, Y-C. and Chao, C-C., "Performance improvement of wire mesh packed double-pass solar air heaters with external recycle", Renewable Energy, Vol.57 (2013), pp.479-489
  21. El-Sebaii, A. A., Aboul-Enein, S., Ramadan, M. R. I. and El-Bialy, E., "Year round performance of double pass solar air heater with packed bed", Energy Conversion and Management, Vol.48 (2007), pp.990-1003
  22. Al-Kamil, M. T. and Al-Ghabeeb, A. A., "Effect of thermal radiation inside solar air heaters", Energy Conversion and Management, Vol.38, No.14 (1997), pp.1451-1458
  23. Aldabbagh, L. B. Y., Egelioglu, F. and Ilkan, M., "Single and double pass solar air heaters with wire mesh as packing bed", Energy, Vol.35 (2010), pp.3783-3787
  24. Ozgen, F., Esen, M. and Esen, H., "Experimental investigation of thermal performance of a doubleflow solar air heater having aluminum cans", Renewable Energy, Vol.34 (2009), pp.2391-2398
  25. Kline, S. J. and McClintock, F. A., "Describing uncertainties in single-sample experiments", Mech. Eng., vol. 75 (1953), pp. 3-8