STUDY OF HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF AIR HEAT EXCHANGER USING PCM FOR FREE COOLING APPLICATIONS

Abstract

Free cooling is the process of storing the cool energy available in the night ambient air and using it during the day. The heat exchanger used in this work is a modular type which is similar to the shell and tube heat exchanger. The shell side is filled with Phase Change Materials (PCM) and air flow is through the tubes in the module. The modules of the heat exchanger are arranged one over other with air spacers in between each module. The air space provided in between the module in-creases the retention time of the air for better heat transfer. Transient Computational Fluid Dynamics modeling is carried out for single air passage in a modular heat exchanger. It shows that the PCM phase transition time in the module in which different shape of fins is adopted. The module with rectangular fins has 17.2 % reduction in solidification compared with the plain module. Then steady state numerical analysis is accomplished to the whole module having the fin of high heat transfer, so that pressure drop, flow and thermal characteristics across the module and the air spacers are deter-mined for various air inlet velocities of 0.4 to 1.6 m/s. To validate the computational results, experiments are carried out and the agreement was found to be good.

Keywords

Dates

  • Submission Date2013-05-31
  • Revision Date2013-12-16
  • Acceptance Date2014-07-27
  • Online Date2014-09-06

DOI Reference

10.2298/TSCI130531096K

References

  1. Adeel Waqas, S. Kumar, et al., Thermal performance of latent heat storage for free cooling of buildings in a dry and hot climate: An experimental study Energy and Buildings Vol.43, pp.2621-2630, 2011.
  2. Ana Lazaro , Pablo Dolado, Jose M. Marin, Belen Zalba, et al., PCM-air heat exchangers for free-cooling applications in buildings: Empirical model and application to design, Energy Conversion and Management Vol.50, pp.444-449, 2009.
  3. Antony Aroul Raj V, R. Velraj , et al., Review on free cooling of buildings using phase change materials, Renewable and Sustainable Energy Reviews Vol.14,pp. 2819-2829, 2010.
  4. Antony Aroul Raj V, R. Velraj, et al., Heat transfer and pressure drop studies on a PCM-heat ex-changer module for free cooling applications, International Journal of Thermal Sciences Vol.50, pp.1573-1582, 2011.
  5. Arkar C, B. Vidrih, S. Medved, et al., Efficiency of free cooling using latent heat storage integrated into the ventilation system of a low energy building, International Journal of Re-frigeration Vol.30, pp.134-143, 2007.
  6. Artmann N, H. Manz , P. Heiselberg, et al., Climatic potential for passive cooling of Buildings by night-time ventilation in Europe Applied Energy vol.84, pp.187-201, 2007.
  7. Atul Sharma V.V. Tyagi , C.R. Chen , D. Buddhi, et al., Review on thermal energy storage with phase change materials and applications, Renewable and Sustainable Energy ReviewsVol.13, pp.318-345, 2009.
  8. Bele´n Zalbaa, Jose´ M. Marý´na, Luisa F. Cabezab, Harald Mehling, et al., Free-cooling of buildings with phase change materials, International Journal of Refrigeration Vol.27,pp. 839-849, 2004.
  9. Edna Shaviv , Abraham Yezioro, Isaac G. Capeluto, et al., Thermal mass and night ventilation as passive cooling design strategy, Renewable Energy Vol. 24, pp.445-452,2001.
  10. Mosaffa A.H, C.A. Infante Ferreira , F. Talati , M.A. Rosen, et al., Thermal performance of a multiple PCM thermal storage unit for free cooling, Energy Conversion and Management Vol.67, pp.1-7, 2013.
  11. Kalaiselvam. S, Karthik.P, et al., Study of heat transfer and pressure drop characteristics of tube-fin heat exchangers in Ice slurry HVAC system, Applied Thermal Engineering, Volume 29, Issues 8-9, June 2009, pp. 1831-1839.
  12. Muhammad Mahmood Aslam Bhutta, Nasir Hayat, Muhammad Hassan Bashir, Ahmer Rais Khan, Kanwar Naveed Ahmad, Sarfaraz Khan, et al., CFD applications in various heat exchang-ers design: A review Applied Thermal Engineering Vol.32, pp.1-12, 2012.
  13. Pablo Dolado , Ana Lazaro, Jose M. Marin, Belen Zalba, et al., Characterization of melting and solidification in a real scale PCM-air heat exchanger: Numerical model and experimental val-idation, Energy Conversion and Management, Vol.52, pp.1890-1907, 2011.
  14. Saso Medved, Ciril Arkar, et al., Correlation between the local climate and the free-cooling po-tential of latent heat storage, Energy and Buildings Vol.40, pp.429-437,2008.
  15. Mosaffa, A,Talati Faramarz, et al., Phase Change Material Solidification in a Finned Cylindrical Shell Thermal Energy Storage,Thermal Science: Year 2013, Vol. 17, pp. 407-418.
  16. Shukla, S. K., Singh, S. K, et al., Effect of Roughness Geometry on Characteristics of Phase Change Material Storage Unit for Night Coolness Storage in Sumer Season, Thermal Science: Year 2013, Vol. 17, pp. 365-375.
  17. Reddigari, M. R, Nallusamy, N., et al., Thermal Energy Storage Using Phase Change Materials - Constant Heat Source, Thermal Science: Year 2012, Vol. 16, pp. 1097-1104
  18. Fok, S. C, Tan, F. L, et al., Experimental Investigations on the Cooling of a Motorcycle Helmet with phase change materials, Thermal Science: Year 2011, Vol. 15, pp. 807-816.