HEAT TRANSFER PREDICTION IN A SHALLOW CAVITY EFFECT OF INCOMING FLOW CHARACTERISTICS

Abstract

This study deals numerically with a heat transfer in a turbulent flow over a shallow cavity. Two different configurations of the incoming flow are considered: a boundary layer flow and a plane wall jet flow, in order to examine the wall jet outer layer effect on the heat transfer. This layer is an important additional turbulence source in the wall jet flow. Reynolds number and turbulence intensity effects were investigated in the boundary layer incoming flow case. The cavity depth to nozzle height ratio effect was examined in the wall jet incoming flow case. The numerical approach is based on k-ω standard turbulence model. This study reveals that the heat transfer is very sensitive to the incoming flow characteristics. The turbulence intensity increase accelerates the reattachment of the shear layer at the cavity floor and enhances the heat transfer. The reattachment phenomenon seems to be less affected by the Reynolds number. However, an increase in this parameter ameliorates the heat transfer. It was also observed a heat transfer enhancement in the wall jet incoming flow case as compared to that of a boundary layer. Likewise, it was found that the augmentation of the cavity depth to the jet nozzle height ratio improves even more the heat transfer. The maximum heat transfer occurs upstream of the reattachment.

Dates

  • Submission Date2014-01-19
  • Revision Date1970-01-01
  • Acceptance Date2014-07-17
  • Online Date2014-08-03

DOI Reference

10.2298/TSCI140119093M

References

  1. Mehrez, Z., et al., Mass Transfer Control of a Backward Facing Step Flow by Local Forcing Effect of Reynolds Number, Thermal Science Scientific Journal, 2011, vol. 15, 2, pp. 367-378
  2. Lancial, N. et al., Effect of a wall jet on heat transfer over a non-confined backward facing step, International Journal of Heat and Fluid Flow, International Journal of Heat and fluid Flow, 2013, dx.doi.org/10.1016/j.ijheatfluidflow.2013.07.003
  3. Mushatet Khudheyer, S., Simulation of Turbulent Flow and Heat Transfer with Ribs Turbulators, Thermal Science International Scientific Journal, 2011, vol. 15, 1, pp. 245-25
  4. Oka, S., Flow Field between Two Roughness Elements in Developed Turbulent Chanel Flow, in: Heat and Mass Transfer in Flows with Separated Regions and Measurement Techniques, Pergamon Press, New York, USA, 1972.
  5. Richards, R.F., Young, M.F. and Haiad, J.C., , Turbulent forced convection heat transfer from a bottom heated open surface cavity, International Journal of Heat and Mass Transfer, 1987, vol. 30, pp. 2281-2287.
  6. Aung, W., An Interferometric Investigation of Separated Forced Convection in Laminar Flow Past Cavities, Heat Transfer Journal, 1983, vol. 105, pp. 505-512.
  7. Bhatti, A. and Aung W., Finite difference analysis of laminar separated forced convection in cavities, Journal of Heat Transfer, 1984, vol. 106, no1, pp. 49-54.
  8. Aghajani et al., Effect of discret heater at the vertical wall of the cavity over heat transfer and entropy generation using LBM, Thermal Science International Scientific Journal, 2011, Vol. 15, Issue 2, pp. 423-435.
  9. Stalio et al., Numerical simultation of forced convection over a periodic series of rectangular cavities at low Prandtl number, International journal of Heat and fluid Flow, 2011, 32, pp. 1014-1023.
  10. Estève, M. J., Reulet, P. and Millan, P., Flow field characterisation within a rectangular cavity, 10th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2000, Portugal.
  11. Madi Arous et al., Jet-cavity interaction: effect of the cavity depth, Progress in computational fluid dynamics, 2012, vol. 11, issue 5, pp. 322-332.
  12. Wilcox, D. C., Turbulence Modelling for CFD, DCW Industries, Inc., La Canada, California, 1998.
  13. Kader, B., Temperature and Concentration Profiles in Fully Turbulent Boundary Layers', International Journal of Heat Mass Transfer, 1981, vol. 24, pp. 1541-1544.
  14. Avelar, A. C. et al., 2007, Three-dimensional flow over shallow cavities, 37th AIAA Fluid Dynamics Conference and Exhibit, 4234
  15. Zdanski, P. S. B, et al., Numerical study of the flow over shallow cavities, Computers & Fluids, 2003, vol. 32, No. 7, pp. 953-974
  16. Madi Arous et al., Influence of upstream flow characteristics on the reattachment phenomenon in shallow cavities, Thermal Science International Scientific Journal, 2011, vol. 15, n° 3, pp. 721-734
  17. Ooi, A., Iaccarino, G. and Behnia, M., Heat transfer predictions in cavities, Center for Turbulence Research, Annual Research Briefs, 1998.
  18. Hattori H. and Nagano Y., Structure and mechanism of heat transfer phenomena in turbulent boundary layer with separation and reattachment via DNS, International Journal of Heat and Fluid Flow, 2012, vol. 37, pp. 81-92.
  19. Vogel, J. and Eaton, J., Combined heat transfer and fluid dynamics measurements downstream of a backward facing step, Journal of heat transfer, 1985, vol. 107, pp. 922-929.
  20. Abu-Mulaweh, H.I. et al., Turbulent mixed convection flow over a backward facing step- the effect of the step heights, International Journal of Heat and Fluid Flow, 2002, vol. 23, pp. 758-765.