EXPERIMENTAL AND NUMERICAL STUDIES OF A SPIRAL PLATE HEAT EXCHANGER

Abstract

An experimental and numerical study of heat transfer and flow characteristics of spiral plate heat exchanger was carried out. The effects of geometrical aspects of the spiral plate heat exchanger and fluid properties on the heat transfer characteristics were also studied. Three spiral plate heat exchangers with different plate spacing (4mm, 5mm and 6 mm) were designed, fabricated and tested. Physical models have been experimented for different process fluids and flow conditions. Water is taken as test fluid. The effect of mass flow rate and Reynolds number on heat transfer coefficient has been studied. Correlation has been developed to predict Nusselt numbers. Numerical models have been simulated using CFD software package FLUENT 6.3.26. The numerical Nusselt number have been calculated and compared with that of experimental Nusselt number.

Dates

  • Submission Date2013-03-17
  • Revision Date2013-05-03
  • Acceptance Date2013-08-29
  • Online Date2013-09-22

DOI Reference

10.2298/TSCI130317131R

References

  1. Egner M.W. and Burmeister L.C. Heat transfer for laminar flow in spiral ducts of rectangular cross section, Journal of Heat Transfer, 127(2005), pp. 352-356.
  2. Burmeister L.C. Effectiveness of a spiral plate heat exchanger with equal capacitance rates, Journal of Heat Transfer, 128( 2006), pp. 295-301.
  3. Martin H., Heat Exchangers, Hemisphere Publishing Corporation, London,1992.
  4. Naphon P. and Wongwises S., An experimental study on the in-tube convective heat transfer coefficients in a spiral-coil heat exchanger, International Communications in Heat and Mass Transfer, 29(2002), No. 6, pp. 797-809.
  5. Naphon P. and Wongwises S. Experimental and theoretical investigation of the heat transfer characteristics and performance of a spiral-coil heat exchanger under dry-surface conditions', 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 24-26 June (2003a), Victoria Falls, Zambia.
  6. Naphon P. and Wongwises S., Investigation of the performance of a spiral-coil finned tube heat exchanger under dehumidifying conditions, Journal of Engineering Physics and Thermophysics, 76(2003b), No.1, pp. 71-79.
  7. Naphon P. and Wongwises S. Heat transfer coefficients under dry- and wet-surface conditions for a spirally coiled finned tube heat exchanger, International Communications in Heat and Mass Transfer, 32(2005), pp. 371-385.
  8. Yang R. and Chiang F.P. An experimental heat transfer study for periodically varying-curvature curved-pipe, International Journal of Heat and Mass Transfer, 45(2002), 15, pp. 3199-32204.
  9. Suga K., Predicting turbulence and heat transfer in 3-D curved ducts by near-wall second moment closers, International Journal of Heat and Mass Transfer, 46(2003),1, pp. 161-173.
  10. Huttl T.J. and Friedrich R. Influence of curvature and torsion on turbulent flow in helically coiled pipes, International Journal of Heat and Fluid Flow, 21(2000), 3, pp. 345-353.
  11. Huttl T.J. and Friedrich R., Direct numerical simulation of turbulent flows in curved and helically coiled pipes, Computers and Fluids, 30(2001), 5, pp. 591-605.
Volume 18, Issue 4, Pages1355 -1360