ENHANCEMENT OF PHASE CHANGE ALONG THE LONG TUBES OF A LATENT HEAT STORAGE UNIT

Abstract

This paper presents the results of an experimental study on the solidification along a long horizontal tube submersed in liquid PCM and the enhancements due to the use of a turbulence promoter. The experimental rig consists of a long copper tube fixed coaxially inside a larger PVC tube filled with liquid PCM (water). The working fluid at a temperature lower than the PCM phase change temperature flows inside the copper tube provoking the solidification of PCM over its surface. The PVC tube is fitted with three windows along its length for observation and photographing the solidified PCM interface. The tests were realized for values of Reynolds number from 741 to 2280 and temperatures varying from -5 to - 20ºC with and without turbulence promoter showed their effects on the interface position, the solidification velocity and how they were enhanced because of the turbulence promoter.

Keywords

Dates

  • Submission Date2012-11-07
  • Revision Date2013-04-22
  • Acceptance Date2013-05-16
  • Online Date2013-06-01

DOI Reference

10.2298/TSCI121107059I

References

  1. Esen, M. and Ayhan, T., Development of a model compatible with solar assisted cylindrical energy storage tank and variation of stored energy with time for different phase change materials Energy Convers. Mgmt , 37, (1996), pp. 1775-1785.
  2. Esen, M., Durmus, A. and Durmus, A., Geometric design of solar-aided latent heat store depending on various parameters and phase change materials, Solar Energy 62, (1998), pp. 19-28.
  3. Esen, M., Solar Energy Thermal performance of a solar-aided latent heat store used for space heating by heat pump, 69,( 2000), pp. 15-25.
  4. Liu, M., Saman, W., Bruno, F., Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems, Renewable and Sustainable Energy Revision, 16, (2012), pp. 2118-2132.
  5. Salunkhe, P.B., Shembekar, P.S., A review on effect of phase change material encapsulation on thermal performance of a system, Renewable and Sustainable Energy Revision, 16, (2012), pp. 5603-5616.
  6. Oró et al., Review on phase change materials (PCMs) for cold thermal energy storage applications, Applied. Energy, 99, (2012), pp. 513-533.
  7. Ismail, K.A.R., Alves, C.L.F., Modesto, M.S., Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder, Applied Thermal Engineering, 21, (2001), pp. 53-77.
  8. Mohamed, M. M., Solidification of phase change material on vertical cylindrical surface in holdup air bubbles. International Journal of Refrigeration, 28, (2005), pp. 403-411.
  9. Habeebullah, B.A., An experimental study on ice formation around horizontal long tubes, International Journal of Refrigeration, 30, (2007), pp. 789-797.
  10. Kalaiselvam et al., Experimental and analytical investigation of solidification and melting characteristics of PCMs inside cylindrical encapsulation, International Journal of Thermal Science 47, (2008), pp. 858-874.
  11. Abdel-Rehim, Z.S., Heat Transfer analysis of a packed bed- PCM capsules latent heat thermal energy storage system, Energy Sources, Part A, 33, (2011), pp. 1326-1343.
  12. Ezan, M. A., Çetin, L., Erek, A., Ice thickness measurement method for thermal energy storage unit, Journal of Thermal Science and Technology, 31, (2011), pp.1-10.
Volume 18, Issue 4, Pages1285 -1292