EFFICACY OF A NOVEL PHASE CHANGE MATERIAL FOR MICROCLIMATE BODY COOLING
Abstract
The present study was conducted in order to evaluate the efficiency of personal body microclimate cooling systems based on a phase change materials (PCM) and its effects on physiological strain in soldiers during exertional heat stress in hot environment. The results are obtained in the experiment conducted in the climatic chamber in the Institute of Hygiene, Military Medical Academy in Belgrade. Ten male soldiers were voluntarily subjected to exertional heat stress tests (EHST) consisted of walking on treadmill (5.5 km/h) in hot conditions (40 °C) in climatic chamber. The subjects performed first test while wearing a field camouflage uniform without any cooling system (''CONTROL'' group) and in second test they used additional microclimate cooling system with paraffin wax consist of n-hexadecane (C16H34), in a form of cooling packs (''COOL'' group). As indicators of thermal strain, mean skin (Tsk) and tympanic (Tty) temperature were determined. Simultaneously, thermal effects of PCM were measured by thermal imaging camera. The exercise in hot conditions induced a physiological response to heat stress, manifested through increased body core and skin temperatures. The results confirmed that the cooling vest worn over the field uniform was able to attenuate the physiological strain during exercise, compared to the identical exposure in the ''control'' group. The results of thermal imaging also indicate that heat generated inside the body is the main factor that will affect the phase change material melting time.
Dates
- Submission Date2013-02-16
- Revision Date2013-07-13
- Acceptance Date2013-09-03
- Online Date2013-09-22
References
- Moran, D. S., Shitzer, A., Pandolf, K. B., A Physiological Strain Index to Evaluate Heat Stress, Am J Physiol 275 (1998), pp. 129-134
- Kenney, W., Heat Flux and Storage in Hot Environments, Int J Sports Med 19 (1998), 2, pp. 92-95
- Teal,W., Microclimate Cooling, Chemical Biological Individual Protection Conference, US Army Natick Solder Center, Massachusetts, USA, 2006
- Fatah, A. A., et al., Guide for the Selection of Personal Protective Equipment for Emergency First Responders , 2nd Edition, Washington, USA, 2007
- Balaras, C. A, Argiriou, A. A, Infrared Thermography for Building Diagnostics, Energy and Buildings, 34 (2002), 2, pp. 171-183
- Moropoulou, A., et al., Determination of Emissivity for Building Materials Using Infrared Thermography, Journal of Thermology International, 10 (2000), 3, pp. 115-118
- Al-Kassir, A. R., et al., Thermographic Study of Energetic Installations, Applied Thermal Engineering, 25 (2005), 2-3, pp. 183-190
- Ring, E. F. J., Ammer, K., The Technique of Infrared Imaging in Medicine, Thermology International, 10 (2000), 1, pp. 7-14
- Meola, C., A New Approach for Estimation of Defects Detection with Infrared Thermography, Material Letters, 61 (2007), 3, pp. 747-750
- Tomic, Lj., Milinovic, M., Experimental Research of Limits for Thermal Modulation Transfer Function, Thermal Science, 13 (2009), 4, pp. 119-128
- Dudic, S. P., et al., Leakage Quantification of Compressed Air on Pipes Using Thermovision, Thermal science, 16 (2012), 2, pp. 555-565
- ISO 12894 (E): Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environment, 2008
- ISO 9886: Ergonomics - evaluation of thermal strain by psychological measurements, 2008
- Radakovic, S. S., Maric, J., Surbatovic, M., Radjen, S., Filipovic, N., Stefanova, E., et al., Effects of acclimation on cognitive performance in soldiers during exertional heat stress, Milit Med, 172 (2007), pp. 190-195
- ***, MP System hardware guide, Biopac Systems Inc., www.biopac.com
- ***, AcqKnowledge 4 Software Guide, Biopac Systems Inc., www.biopac.com
- Jovanovic, D. et. al., Application of Contemporary Technologies for Heat Stress Prevention in Hazard Environment, Proceedings, Safety of Technical Systems International Conference, STS2011, Nis, Serbia, 2011, pp. 137-142
- Sharma, A., et al., Review on Thermal Energy Storage with Phase Change Materials and Applications, Renewable and Sustainable Energy Reviews, 13 (2009), pp. 318-345
- Mondal S., Phase Change Materials for Smart Textiles, Applied Thermal Engineering, 28 (2008), pp. 1536-1550
- Shen, W., Tan, F. L., Thermal Management of Mobile Devices, Thermal Science, 14 (2010), 1, pp. 115-124
- Fok, S. C., Tan, F. L., Sua, C. C., Experimental Investigations on the Cooling of a Motorcycle Helmet with Phase Change Material, Thermal Science, 15 (2011), 3, pp. 807- 816
- Bansevicius, R., Rackiene, R., Virbalis, J. A., The Body Cooling System Integrated into the Clothes, Electronics and electrical engineering, 77 (2007), 5, pp. 3-6
- Hadid, A., et al., Effect of a Personal Ambient Ventilation System on Physiological Strain during Heat Stress Wearing a Ballistic Vest, Eur. J. Appl. Physiol, 104 (2008), pp. 311-319
- Mclellan, T. M., The Efficacy of an Air-Cooling Vest to Reduce Thermal Strain for Light Armour Vehicle Personnel, Technical Report No 2, Toronto, Canada, 2007
Volume
18,
Issue
2,
Pages657 -665