MODELLING OF SOLAR DISTILLATION SYSTEM WITH PHASE CHANGE MATERIAL (PCM) STORAGE MEDIUM

Abstract

An experimental investigation on a passive solar still with myristic acid as phase change material (PCM) is carried out to examine the effect of both the mass of PCM and basin water on the daily distillate output and efficiency of the system under indoor simulated condition. Basic energy balance equations are written to predict the water and glass temperatures, daily distillate output and instantaneous efficiency of the single slope solar distillation system with PCM. It is found that the higher mass of PCM with lower mass of water in the solar still basin significantly increases the daily yield and efficiency, but when the amount of PCM exceeds 20 kg productivity reduces. Therefore, a novel and simple of solar stills with PCM is proposed to enhance the overall productivity of the distillation system. The new solar still has increased the distillate output by 35-40 %. The use of inner glass cover temperature for productivity prediction has also been investigated, and the prediction shows relatively better agreement with the experimental data.

Keywords

Dates

  • Submission Date2012-01-02
  • Revision Date2012-05-22
  • Acceptance Date2012-05-30

DOI Reference

10.2298/TSCI120102110A

References

  1. Bachir, B., A solar desalination plant for domestic water needs in arid areas of South Algeria, Desalination, 153 (2003),1-3, pp. 65-69
  2. Taiwo, M.O., Improving the Performance of Solar Stills using Sun Tracking in Mechanical Engineering. Strathclyde Engineering, 2010.
  3. Shukla, S.K.,Rai, A.K., Analytical Thermal Modelling of Double Slope Solar Still by Using Inner Glass Cover temperature, Thermal Science, 12 (2008),3, pp. 139-152
  4. Shukla, S.K., Product Cost Calculations of Various Designs of Conventional Solar Still Systems, Int. Journal of Agile Systems and Mgmt., 4 (2009),1/2, pp. 86-97
  5. Akash, B.A., et al., Experimental evaluation of a single-basin solar still using different absorbing materials, Renewable Energy, 14 (1998),1-4, pp. 307-310
  6. Nafey, A.S., et al., Parameters affecting solar still productivity, Energy Conversion and Management, 41 (2000),16, pp. 1797-1809
  7. Badran, O.O., Experimental study of the enhancement parameters on a single slope solar still productivity, Desalination, 209 (2007),1-3, pp. 136-143
  8. Shukla, S.K.,Sorayan, V.P.S., Thermal modeling of solar stills: An experimental validation: Renewable Energy, Fuel and Energy Abstracts, 30 (2005),5, pp. 683-699
  9. Cengel, Y.A., Heat and Mass Transfer - A practical Approach, ed. 3, Tata MCGraw-Hill Publishing Company Limited, New Delhi,India, 2007
  10. Fath, H., Solar distillation: a promising alternative for water provision with free energy, a simple technology and a clean environment, , Desalination, 116 (1998), pp. 45-56
  11. Anil, K.R., Effect of various dyes on solar distillation, Solar Energy, 27 (1981),1, pp. 51-65
  12. Dev, R.,Tiwari, G.N., Characteristic equation of a passive solar still, Desalination, 245 (2009),1-3, pp. 246-265
  13. Abdulhaiy, M.R., Transient analysis of a stepped solar still for heating and humidifying greenhouses, Desalination, 161 (2004),1, pp. 89-97 SSWPCM SSWOUTPCM Time
  14. El-Sebaii, A.A., et al., Thermal performance of a single basin solar still with PCM as a storage medium, Applied Energy, 86 (2009),7-8, pp. 1187-1195
  15. Nafey, A.S., et al., Enhancement of solar still productivity using floating perforated black plate, Energy Conversion and Management, 43 (2002),7, pp. 937-946
  16. Agyenim, F., et al., A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS), Renewable and Sustainable Energy Reviews, 14 (2010),2, pp. 615-628
  17. Kaygusuz, K.,Sarı, A., Renewable energy potential and utilization in Turkey, Energy Conversion and Management, 44 (2003),3, pp. 459-478
  18. Sarı, A.,Kaygusuz, K., Some fatty acids used for latent heat storage thermal stability and corrosion of metals with respect to thermal cycling, Renewable Energy, 28 (2003), pp. 939-948
  19. Sarı, S., Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications, Energy Conversion and Management, 44 (2003),14, pp. 2277-2287
  20. Sarı, A.,Kaygusuz, K., Thermal performance of myristic acid as a phase change material for energy storage application, Renewable Energy, 24 (2001),2, pp. 303-317
  21. Sharma, D., Kitano, H., and Sagara, K., Phase Change Materials for Low Temperature Solar Thermal Applications, Res. Rep. Fac. Eng. Mie Univ., 29 (2004), pp. 31-64
  22. Buddhi D, et al., A simplification of the differential thermal analysis method to determine the latent heat of fusion of phase change materials, J. Phys. D: Appl. Phys., 20 (1987 ), pp. 1601
  23. Sharma, V.B.,Mullick, S.C., Estimation of Heat-Transfer Coefficients, the Upward Heat Flow, and Evaporation in a Solar Still, Journal of Solar Energy Engineering, 113 (1991),1, pp. 36-41
  24. YUNG, C.S.,LANSING, F.L., Performance simulation of the JPL solar-powered distiller. Part 1: Quasi-steady-state conditions,The Telecommunications and Data Acquisition Progress Report. p. 142-160, October 1982.
  25. Rao, S.S., Engineering Optimization Theory and Practice third enlarge edition, New Age international Publishers, New Delhi, India,, 2010
  26. Majumdar, P., Computational methods for heat and mass transfer, Taylor and Franics, New York, 2005
  27. Tiwari, A.K., Annual performance of solar stills for different inclinations of condensing covers and water depths, PhD Thesis. Indian Institute of Technology: New Delhi, India, 2006.
Volume 18, Issue 12, Pages347 -362