CONVECTIVE HEAT TRANSFER OVER A WALL MOUNTED CUBE AT DIFFERENT ANGLE OF ATTACK USING LARGE EDDY SIMULATION

Abstract

Turbulent fluid flow and convective heat transfer over the wall mounted cube in different flow angle of attack have been studied numerically using Large Eddy Simulation. Cube faces and plate have a constant heat flux. Dynamic Smagorinsky (DS) subgrid scale model were used in this study. Angles were in the range 0≤θ≤45 and Reynolds number based on the cube height and free stream velocity was 4200. The numerical simulation results were compared with the experimental data of Nakamura et al [6, 7]. Characteristics of fluid flow field and heat transfer compared for four angles of attack. Flow around the cube was classified to four regimes. Results was represented in the form of time averaged normalized streamwise velocity and Reynolds stress in different positions, temperature contours, local and average Nusselt number over the faces of cube. Local convective heat transfer on cube faces was affected by flow pattern around the cube. The local convective heat transfer from the faces of the cube and plate are directly related to the complex phenomena such as horse shoe vortex, arch vortexes in behind the cube, separation and reattachment. Results show that overall convective heat transfer of cube and mean drag coefficient have maximum and minimum value at θ=0 deg and θ=25 deg respectively.

Dates

  • Submission Date2011-06-14
  • Revision Date2013-02-20
  • Acceptance Date2013-06-26
  • Online Date2013-07-06

DOI Reference

10.2298/TSCI110614088H

References

  1. Igarash,T, Heat transfer from a square prism to an air stream, Int. J. Heat Mass transfer, 28 (1985), 1, pp. 175-181
  2. Igarash,T, Local heat transfer from a square prism to an air stream, Int. J. Heat Mass transfer, 29 (1986), 5, pp. 777-784
  3. Natarajan, V and Chyu, M.K., Effect of flow angle of attack on the local heat/mass transfer from a wall-mounted cube, ASME J. Heat Transfer, 116 (1994), 3, pp. 552-560
  4. Meinders, E.R., Hanjalic, K., Martinuzzi, R.J., Experimental study of the local convective heat transfer from a wall mounted cube in turbulent channel flow, ASME J. Heat Transfer, 121 (1999), 3, pp. 564-573
  5. Meinders, E.R., Hanjalic, K., Vortex structure and heat transfer in turbulent flow over wall -mounted matrix of cubes, Int. J. Heat and Fluid Flow, 20(1999), 3, pp.255-267
  6. Nakamura,H., Igarashi,T.,Tsutsui,T., Local heat transfer around a wall mounted cube in the turbulent boundary layer, Int. J. Heat and Mass Transfer, 44(2001),18, pp. 3385-3395
  7. Nakamura,H., Igarashi,T.,Tsutsui,T., Local heat transfer around a wall mounted cube at 45° to flow in a turbulent boundary layer, Int. J. Heat and Fluid Flow, 24(2003),6, pp.807-815
  8. Niceno, B., Dronkers, A.D.T., Hanjalic, K., Turbulent heat transfer from a multi-layered wall mounted cube matrix: a large eddy simulation, Int. J. Heat and Fluid Flow, 23(2002), 2, pp.173-185
  9. Farhadi, M., Rahnama, M., Large eddy simulation of separated flow over a wall mounted cube, Scientia Iranica, 13(2006), 2, pp. 124-133
  10. Sedighi, K., Farhadi, M., Three-dimensional study of vortical structure around a cubic bluff body in a channel, FACTA UNIVERSITATIS Series: Mechanical Engineering, 4(2006), 1, pp. 1-16
  11. Bakic,V., Experimental investigation of a flow around a sphere, Thermal Science, 8(2004), 1, pp.63- 81
  12. Bakic,V., Schmid, M., Stankovic, B., Experimental investigation of turbulent structures of flow around a sphere, Thermal Science, 10(2006), 2, pp.97-112
  13. Sohankar, A., Flow over a bluff body from moderate to high Reynolds numbers using large eddy simulation, J .Computers & Fluids, 35(2006),10, pp. 1154-1168
  14. Martinuzzi, R. J., Havel, B., Vortex shedding from two surface mounted cubes in tandem, Int. J. Heat and Fluid Flow, 25(2004), 3, pp. 364-372
  15. Farhadi, M., Sedighi, K., Flow over two tandem wall mounted cubes using large eddy simulation, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (2008), 8, pp. 1465-1475
  16. Lammers, P., Jovanovic, J., Durst, F., Numerical experiments on wall turbulence at low Reynolds number, Thermal Science, 10(2006), 2, pp.33-62
  17. Chakrabarty, D., Brahma, R., Effect of wall proximity in fluid flow and heat transfer from a square prism placed inside a wind tunnel, Thermal Science, 11(2007), 4, pp.65-78
  18. Hemida, H., Spehr, F., Krajnovic, S., Local heat transfer enhancement around a matrix of wall mounted cubes using passive flow control: Large-eddy simulations, Int. J. Heat and Fluid Flow, 29(2008), 5, pp.1258-1267
  19. Nooroulahi, M., Farhadi, M., Sedighi, K, Large eddy simulation of flow over a wall-mounted cube: Comparison of different semi dynamic subgrid scale models, Int. J. of Multi physics, 6(2012), 1, pp.43-60
  20. Omidyeganeh, M., Abedi, J., Numerical simulation of the wind flow around a cube in channel, International Colloquium on: Bluff Bodies Aerodynamics & Application, (2008)
  21. Schmidt, S., Thiele, F., Comparison of numerical methods applied to flow over wall-mounted cubes, Int. J. Heat and Fluid Flow, 23(2002),3, pp.330-339
  22. Seeta Ratnam, G., Vengadesan, S., Performance of two equation turbulence models for prediction of flow and heat transfer over a wall mounted cube, Int. J. Heat and Mass Transfer, 51(2008), 11, pp. 2834- 2846
  23. Germano et al, A dynamic subgrid-scale eddy viscosity model, Physics of Fluids A, 3(1991), 7, pp. 1760-1765
  24. Lilly, D. K., A Proposed modification of the Germano subgrid-scale closure model, Physics of Fluids, 4(1992), 3, pp. 633-635
  25. Leonard, B.P., The ULTIMATE conservative difference scheme applied on unsteady one- dimensional advection, J. Computer Methods in Applied Mechanics and Engineering, 88(1991) , 1, pp. 17-74.
  26. FLUENT, Turbulence models, Documentation report, Chapter 9
Volume 18, Issue 12, Pages301 -315