ENHANCEMENT IN THERMAL AND MECHANICAL PROPERTIES OF BRICKS

Abstract

A new type of porous brick is proposed. Sawdust is initially well ixed with wet clay in order to create voids inside the brick uring the firing process. The voids will enhance the total erformance of the brick due to the reduction of its density and hermal conductivity and a minor reduction of its compressive tress. All these properties have been measured experimentally nd good performance has been obtained. Although a minor eduction in compressive stress has been observed with ncreased porosity, this property has still been larger than that f the common used hollow brick. Data obtained by this work ead to a new type of effective brick having a good performance ith no possibility that mortar enters inside the holes which is he case with the common used hollow bricks. The mortar has a eterment effect on thermal properties of the wall since it has ome higher thermal conductivity and density than that of rick which increases the wall overall density and thermal onductivity of the wall.

Dates

  • Submission Date2011-06-10
  • Revision Date2012-02-11
  • Acceptance Date2012-03-11

DOI Reference

10.2298/TSCI110610043S

References

  1. Turgut, P. and Yesilata, B., "Physico-mechanical and thermal performances of newly developed rubber-added bricks", Energy and Buildings,. 40(2008), pp. 679-688.
  2. Solemez, M. S., "On the effective thermal conductivity", Building and env.,34(1991),1, pp.1-5
  3. Aeslina Abdul Kadir, Abbas Mohajerani, Felicity Roddick and John Buckeridge , Density, Strength, Thermal Conductivity and Leachate Characteristics of Light-Weight Fired, International Journal of Civil and Environmental Engineering 2(2010)4,pp179-184.
  4. Xu Lingling, Guo Wei, Wang Tao and Yang Nanru, Study on fired bricks with replacing clay by fly ash in high volume ratio, Construction and Building Materials, 19(2005)3, pp. 243-247
  5. Ismail Demir, M. Serhat Baspınar and Mehmet Orhan: Utilization of kraft pulp production residues in clay brick production, Building and Environment, 40(2005)11, pp. 1533-1537
  6. Asokan Pappu, Mohini Saxena and Shyam R. Asolekar: Solid wastes generation in India and their recycling potential in building materials, Building and Environment, 42(2007) 6, pp.: 2311- 2320
  7. Topcu IB ,Semi-lightweight concretes produced by volcanic slag. Cem Concr Res 27(1997),pp.5-21
  8. Al-Khaiat H, Haque MN ,Effect of initial curing on early strength and physical properties of lightweight concrete. Cem Concr Res 2(1998)8,pp.859-866
  9. Kılıc¸ A, Atıs¸ CD, Yas¸ar E, O¨ zcan F , High-strength lightweight concrete made with scoria aggregate containing mineral admixtures. Cem Concr Res 33(2003),pp.1595-1599
  10. Phonphuaka( et.al), Effects of charcoal on physical and mechanical properties of fired test briquettes, Science Asia 37 (2011),pp. 120-124
  11. Viktor Bánhid, Enhancement of insulating properties of brick clay by renewable agricultural wastes , Processing and Application of Ceramics 2 , (2008),pp. 75-79.
  12. Emmanuel A.Okunade ,The effect of wood Ash and Sawdust admixture on the engineering properties of a burnt laterite-Clay Brick, J. Applied Science 8(2008),6.pp.1042-1048
  13. ASTM standard C373-88, Standard test method for water absorption, bulk density, apparent ,porosity and apparent specific gravity of white ware products, 1999.
  14. ASTM Standard C-177-85, Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded hot plate apparatus, Annual Book of ASTM Standards, 4.06, 1985.
Volume 17, Issue 4, Pages1119 -1123