AN EXPERIMENTAL INVESTIGATION OF FORCED CONVECTION FLAT PLATE SOLAR AIR HEATER WITH STORAGE MATERIAL

Abstract

Solar air heater (SAH) is a heating device that uses the heated air in the drying of agriculture products and many engineering applications. The purpose of the present work is to study a forced convection flat plate solar air heater with granite stone storage material bed under the climatic conditions of Egypt-Aswan. Experiments are performed at different air mass flow rates ; varying from 0.016 kg/s to 0.08 kg/s, for five hot summer days of July 2008. Hourly values of global solar radiation and some meteorological data (temperature, pressure, relative humidities, etc.) for measuring days are obtained from the Egyptian Meteorological Authority, Aswan station. Inlet and outlet temperatures of air from a SAH have been recorded. In this work, attempt has been made to present the temperature distribution in non dimensional form that makes it useable for any region and not restricted to local conditions. The variation of solar radiation, air heater efficiency, Nusselt number and temperature distribution along the air heater are discussed. Comparisons between the calculated values of outlet air temperatures, average air temperatures and storage material temperatures and the corresponding measured values showed good agreement. Comparison between current work and those in previous investigations showed fair agreement.

Keywords

Dates

  • Submission Date2011-06-07
  • Revision Date2012-01-11
  • Acceptance Date2012-01-16

DOI Reference

10.2298/TSCI110607006A

References

  1. Karim, M. A. and Hawlader, M. N. A. Development of Solar Air Collectors for Drying Applications, Energy Conversion and Management, 45 (2004), pp. 329-344.
  2. Ekechukwu, O. V. and Norton, B. Experimental Studies of Integral-Type Natural-Circulation Solar-Energy Tropical Crop Dryers, Energy Convers. Mgmt , 38 (1997), 14, pp. 1483-1500.
  3. Janjai, S. and Tung , P. Performance of a Solar Dryer Using Hot Air from Roof-Integrated Solar Collectors for Drying Herbs and Spices, Renewable Energy , 30 (2005), pp. 2085-2095.
  4. Ayensu, A. Dehydration of food crops using a solar dryer with convective heat flow, Solar Energy ,59 (1997), 4-6, pp. 121-126.
  5. El-Sebaii, A. A. , Aboul-Enein, S., Ramadan, M. R. I. and El-Gohary, H.G. Experimental investigation of an indirect type natural convection solar dryer, Energy Conversion and Management , 43 (2002), pp. 2251-2266.
  6. Thanvi, C. K. P. and Pande, P. C. Development of a low-cost solar agricultural dryer for arid regions of India, Energy in Agriculture , 6 (1987), pp. 35-40.
  7. Esper, A. and Muhlbauer, W. Solar drying-an effective means of food preservation, Renewable Energy, I5 (1998), pp. 95-100.
  8. El-Sawi, A. M., Wifi, A. S., Younan, M.Y. , Elsayed, E. A. and Basily, B. B. Application of folded sheet metal in flat bed solar air collectors, Applied Thermal Engineering , 30 (2010), pp. 864-871.
  9. Stefanovic, V. P., Bojic, M. Lj. Development and investigation of solar collectors for conversion of solar radiation into heat and/or electricity, Thermal Science, 10 (2006), Suppl., 4, pp. 177-187
  10. Ekechukwu, O. V. and Norton, B. "Review of solar-energy drying systems II: an overview of solar drying technology", Energy Conversion & Management, 40 (1999), pp. 615-655.
  11. Henderson, D., Junaidi, H., Muneer, T., Grassie, T. and Currie, J. Experimental and CFD investigation of an ICSSWH at various inclinations, Renewable and Sustainable Energy Reviews,11 (2007), 6, pp. 1087-1116.
  12. Dragicevic, S. M., Vuckovic, N. M. Evaluation of distributional solar radiation parameters of Cacak using long-term measured global solar radiation data, Thermal Science, 11 (2007), 4, pp. 125-134.
  13. Luminosu, I., De Sabata, C. and But, A. Solar equipment for preheating bitumen , Thermal Science, 11 (2007), 1, pp. 127-136.
  14. Jain, D. and Jain, R. K. Performance evaluation of an inclined multi-pass solar air heater with in-built thermal storage on deep-bed drying application, Journal of Food Engineering, 65 (2004), pp. 497-509.
  15. Abdullah, M. O. , Mikie, F. A. and Lam, C. Y. Drying performance and thermal transient study with solar radiation supplemented by forced-ventilation, International Journal of Thermal Sciences, 45 (2006), 10, pp. 1027-1034.
  16. Aboul-Enein, S., El-Sebaii, A. A., Ramadan, M. R. I. and El-Gohary., H. G. "Parametric study of a solar air heater with and without thermal storage for solar drying applications", Renewable Energy, 21 ( 2000), pp.505-522.
  17. Lienhard IV, J. H. and Lienhard V, J. H. "A heat transfer text book, 3rd ed., Cambridge, MA, Phlogiston Press, 2004.
  18. Vlachos, N. A., Karapantsios, T. D., Balouktsis, A. I. and Chassapis, D., "Design and testing of a new solar tray dryer", Drying Technology, 20 (2002), 5, pp. 1239-1267.
  19. Ali, A. H. H., Kishinami, K., Hanaoka, Y. and Suzuki, J. Experimental study of laminar flow forced-convection heat transfer in air flowing through offset plates heated by radiation heat flux, Int. Comm. Heat Mass Transfer, 25 (1998), 3, pp. 297-308.
  20. Arinze., E. A. , Schoenau, G. J. and Sokhansanj, S. Design and experimental evaluation of a solar dryer for commercial high-quality HAY production, Renewable Energy, 16 (1999), pp. 639-642.
  21. Arinze, E. A., Sokhansanj, S., Schoenau, G. J. and Ellis, V. Design and experimental evaluation of a new commercial type mobile solar grain dryer provided with high efficiency fined-plate collector, WREC 1996, pp. 670-675.
  22. Kadam, D. M. and Samuel, D. V. K., Convective flat-plate solar heat collector for cauliflower drying,, Biosystems Engineering, 93 (2006), 2, pp. 189-198.
  23. Figliola, R. S. and Beasley, D. E., Theory and Design for Mechanical Measurements, John Wiley & Sons, New York, USA, 2nd edn., 1995.
  24. Shanmugam, V. and Natarajan, E. Experimental investigation of forced convection and desiccant integrated solar dryer, Renewable Energy, 31 (2006), pp. 1239-1251.
Volume 16, Issue 4, Pages1105 -1116