EXPERIMENTAL INVESTIGATIONS ON THE COOLING OF A MOTORCYCLE HELMET WITH PHASE CHANGE MATERIAL (PCM)

Abstract

The thermal comfort of motorcycle helmet during hot weather is important as it can affect the physiological and psychological condition of the rider. This paper examines the use of phase change material (PCM) to cool a motorcycle helmet and presents the experimental investigations on the influences of the simulated solar radiation, wind speed, and heat generation rate on the cooling system. The result shows that the PCM-cooled helmet is able to prolong the thermal comfort period compared to a normal helmet. The findings also indicate that the heat generation from the head is the predominant factor that will affect the PCM melting time. Simulated solar radiation and ram-air due to vehicle motion under adiabatic condition can have very little influences on the PCM melting time. The results suggested that the helmet usage time would be influenced by the amount of heat generated from the head. Some major design considerations based on these findings have been included. Although this investigation focuses on the cooling of a motorcyclist helmet, the findings would also be useful for the development of PCM-cooling systems in other applications.

Keywords

Dates

  • Submission Date2010-06-27
  • Revision Date2011-02-21
  • Acceptance Date2011-03-25

DOI Reference

10.2298/TSCI100627027F

References

  1. Akbar-Khanzadeh, F., Bisesi, M.S., Comfort of personal protective equipment, Applied Ergonomics, 26 (1995), pp. 195-198
  2. Airaksinen, M., Tuomaala, P., Holopainen, R., Modeling human thermal comfort, Paper presented at CLIMA 2007 - Wellbeing Indoors, Helsinki, Finland, 2007
  3. Hsu, Y.L., Tai, C.Y., Chen, T.C., Improving thermal properties of industrial safety helmets, Journal of Industrial Ergonomics, 26 (1999), pp. 109-117
  4. Hachimi-Idrissi, S., Corne, L., Ebinger, G., Michotte, Y., Huyghens, L. Mild hypothermia induced by a helmet device: a clinical feasibility study, Resuscitation, 51 (2001), pp. 275-281
  5. Buist, R.J., Streitwieser, G.D., The thermoelectrically cooled helmet, Proceeding of the Seventeenth International Thermoelectric Conference, Arlington, Texas, USA, 1988, pp. 88-94
  6. Mayes, J., Hughes, K., Understanding weather: A visual approach, Arnold Publishers, USA, 2004
  7. Rasch, W., Samson, P., Cote, J., Cabanac, M., Heat loss from the human head during exercise, Journal of Applied Physiology, 71 (1991), 2, pp. 590-595
  8. Clark, R.P., Toy, N., Forced convection around the human head, Journal of Applied Physiology, 244 (1975), pp. 295-302
  9. Holland, E.J., Laing, R.M., Lemmon, T.L., Niven, B.E., Helmet design to facilitate thermoneutrality during forest harvesting, Ergonomics, 45 (2002), pp. 699-716
  10. Fresh Air System Technology: Airflow cooled helmet, www.fastraceproducts.com
  11. Jwo, C.S., Chien, C.C., Solar power-operated cooling helmet, U. S. Patent 200701376845A1, 2007
  12. Shen, W., Tan, F.L., Thermal management of mobile devices, Thermal Science, 14 (2010), pp. 115-124
  13. Tan, F.L., Fok, S.C., Cooling of helmet with phase change material, Journal of Applied Thermal Engineering, 26 (2006), pp.2067-2072
  14. PCM Energy P. Ltd.: Catalogues of phase change materials, www.pcmenergy.com
  15. Leoni, N., Amon, C., Transient thermal design of wearable computers with embedded electronics using phase change materials, ASME HTD, 343 (1997), pp. 49-56
  16. Antohe, B.V., Lage, J.L., Price, D.C., Weber, J.L., Thermal management of high frequency electronic systems with mechanically compressed microporous cold plates, Proceeding of ASME National Heat Transfer Conference on Thermal Management of Commercial and Military Electronics, 1996, pp. 179-186
  17. Wirtz, R. A., Zheng, N., Chandra, D., Thermal management using dry phase change materials, Proceeding of Fifteen IEEE Semiconductor Thermal Measurement and Management Symposium, San Diego CA, 1999, pp. 74-82
  18. Houdas, Y., Ring, E.F.J., Human body temperature, its measurement and regulation, The Quarterly Review of Biology, 58 (1983), pp 81-103
  19. El Ganaoui, M., Semma, E.A., A lattice Boltzmann coupled to finite volumes method for solving phase change problems, Thermal Science, 13 (2009), pp. 205-216
  20. Fok, S.C., Shen, W., Tan, F.L., Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks, International Journal of Thermal Sciences,49 (2010), pp. 109-117
  21. Tarlochan, F., Hamouda, A.M.S., Mahdi, E., Sahari, B.B., Composite sandwich structures for crashworthiness applications, Proc. IMechE, Part L: Journal of Materials: Design and Applications, 221 (2007), pp. 121-130
Volume 15, Issue 3, Pages807 -816