CREEP TRANSITION STRESSES IN A THIN ROTATING DISC WITH SHAFT BY FINITE DEFORMATION UNDER STEADY-STATE TEMPERATURE

Abstract

Creep stresses and strain rates have been derived for a thin rotating disc with shaft at different temperature. Results have been discussed and presented graphically. It has been observed that radial stress has maximum value at the internal surface of the rotating disc made of incompressible material as compared to circumferential stress and this value of radial stress further increase with the increase of angular speed. With the introduction of thermal effect, it has been observed that radial stress has higher maximum value at the internal surface of the rotating disc made of incompressible material as compared to circumferential stress, and this value of radial stress further increases with the increase of angular speed as compared to the case without thermal effect. Strain rates have maximum values at the internal surface for compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore.

Keywords

Dates

  • Submission Date2009-06-26
  • Revision Date2010-01-04
  • Acceptance Date2010-01-08

DOI Reference

10.2298/TSCI1002425P

References

  1. Boyle, J. T., Spence, J., Stress Analysis for Creep, Butterworths Co., London, 1983
  2. Kraus, H., Creep Analysis, John Wiley & Sons, New York, USA, 1980
  3. Lubhan, D., Felger R. P., Plasticity and Creep of Metals, John Wiley & Sons, New York, USA, 1961
  4. Nabarro, F. R. N., Villiers H. L., de, Physics of Creep, Taylor & Francis, London, 1995
  5. Odqvist, F. K.G., Mathematical Theory of Creep and Creep Rupture, Clarendon Press, Oxford, UK, 1974
  6. Penny, R. K., Mariott, D. L., Design for Creep Chapman and Hall, London, 1995
  7. Wahl, A. M., Analysis of Creep in Rotating Discs Based on Tresca Criterion and Associated Flow Rule, Jr. Appl. Mech., 23 (1956), 2, pp. 103-106
  8. Seth, B. R., Transition Theory of Elastic-Plastic Deformation, Creep and Relaxation, Nature, 195 (1962), pp. 896-897
  9. Seth, B. R., Measure Concept in Mechanics, Int. J. Non-linear Mech., 1 (1966), 1, pp. 35-40
  10. Parkus, H., Thermo-Elasticity, Springer-Verlag, New York, USA, 1976
  11. Seth, B. R., Creep Rupture, IUTAM Symposium on Creep in Structures, Gothenberg, 1970, pp. 167-169
  12. Seth, B. R., Creep Transition, J. Math. Phys. Sci., 6 (1972), 1, pp. 1-5
  13. Seth, B. R., Creep Transition in Rotating Cylinder, J. Math. Phys. Sci., 8 (1974), 1, pp. 1-5
  14. Gupta, S. K., Dharmani, R. L., Creep Transition in Rotating Cylinders, Int. J. Pure Applied Math., 15 (1981), 6, pp. 525-536
  15. Gupta, S. K., Creep Transition in Bending of Rectangular Plates, Proceedings, International Symposium on Non-Linear Mech., Kharagpur, India, 1980, pp. 169-175
  16. Gupta, S. K., Rana, V. D., Thermo Elastic-Plastic and Creep Transition in Rotating Cylinder, J. Math. Phy. Sci., 23 (1989), 1, pp. 71-90
  17. Gupta, S. K., Dharmani, R. L., Creep Transition in Thick Walled Cylinder under Internal Pressure, Z.A.M.M. Mech., 59 (1979), 2, pp. 517- 521
  18. Gupta , S. K., Sonia, T. P., Creep Transition in a thin Rotating Disc of Variable Density, Defence Sci. Journal, India, 50 (2000), 2, pp. 147-153
  19. Gupta, S. K., Sharma, S., Proceeding, 3rd International Congress on Thermal Stresses, Cracow, Poland, 1999 , pp. 345-348
  20. Gupta, S. K., Pankaj, T., Creep Transition in a Thin Rotating Disc with Rigid Inclusion, Defence Science Journal, India, 57 (2007), 2, pp. 185-195
  21. Sokolnikoff, I. S., Mathematical Theory of Elasticity, 2nd ed., New York, USA,1952, pp. 65-79
  22. Levitsky, M., Shaffer, B. W., Residual Thermal Stresses in a Solid Sphere form a Thermosetting Material, Jr. of Appl. Mech., Trans. of ASME, 42 (1975), 3, pp. 651-655
Volume 14, Issue 2, Pages425 -436