OVERVIEW OF A NEW METHOD FOR DESIGNING HIGH EFFICIENCY SMALL HYDRO POWER PLANTS

Abstract

Significant number of research projects in the area of renewable energy sources (especially for small hydro power plants) has been made within the Department for Energy and Process Engineering and Regional Euro Energy Efficiency Center at Faculty of Mechanical Engineering (University of Kragujevac, Serbia) since early eighties. The results are various; numerous domestic and international recognition and technical performance tell about the success of the research. Research projects have been following the technical and technological development of research equipment and economy growth. This has led to the development of software for designing turbines of SHP plants. In order to notify the public about possibilities of our software, in this paper is briefly described a mathematical model and procedures for calculating and designing of SHPP for known conditions. As an argument for assessing the validity and potential of our research results is shown constructed SHP plant "Bosnia 1", 2 x 100 kW power.

Dates

  • Submission Date2010-05-15
  • Revision Date2010-07-06
  • Acceptance Date2010-07-07

DOI Reference

10.2298/TSCI100515022B

References

  1. M. Babić, S. Stojković, Osnove turbomašina - principi dejstva i matematičkog modeliranja, Prosveta, Beograd, 1997.
  2. M. Babić O projektovanju i razvoju mikro hidrocentrala, Prvo savetovanje o energetici Republike Srpske i Republike Srpske Krajine, Banja Luka, 1993.
  3. M. Babić, D. Milovanović, The Tree-Dimensional Method for Calculation of the Inviscid and Incompressible Flow Field in Turbo Impeller, pp11., Ninth International Conference on Numerical Methods in Laminar and Turbulent Flow", Atlanta, USA, 1995.
  4. D. Milovanović, M. Babić, The Investigation of Flow Coefficient Influence on the Pressure Distribution Along Blade Profile Contour on Surfaces of Revolution in Turbo machinery, pp. 8, IV Greek Congress on Mechanics, Xanthi, Greece, 1995.
  5. D. Milovanović, M. Babić, M. Bojić, Design principles and methods: design method for centrifugal flow pumps, 12th International Congress of Chemical and Process Engineering, CHISA 96, Praha, Czech Republic, 1996.
  6. Babić, M., Milovanović, D., Application of collocation method in three¬dimensional fluid flow solution in hydraulic turbo machine impellers, Proceedings of II International Symposium "Contemporary problems of Fluid Mechanics", pp. 225-232, Belgrade, 1996.
  7. Soulis, J. V., Jovičić, N., Milovanović, D., Babić, M., Despotović, M., Numerical Modeling of Incompressible Turbulent Flow in Turbo machinery, Journal of Computational Fluid Dynamics, Vol 11, pp. 259-265, 1998.
  8. Babić M., Darijević K., Milovanović D., Jovičić N., Despotović N., Gordić D., Prikaz novog proizvoda - mikrohidrocentrala "Brestovac", Dokumenti Katedre za energetiku i procesnu tehniku 98 Broj 1, Mašinski fakultet, Kragujevac, 1998.
  9. Jovičić, N., Milovanović, D., Babić, M., Soulis, J. V., A multigrid Algorithm For Three-Dimensional Incompressible Turbulent Flows Part I: Numerical Method, Theoretical and Applied Mechanics , ISNN 0350-2708, Beograd
  10. Despotović, M., Babić, M., Milovanović, D., Jovičić, N., Convergence acceleration of compressible Navier-Stokes equations by means of multigrid method, Proceedings of the XXIII Yugoslav Congress of Theoretical and Applied Mechanics, pp.125-128, Beograd, 2001
  11. Jovicic N., Jovicic G., Babic M., Milovanovic D., Computational Efficiency of Artificial Dissipation Models for Three-Dimensional Incompressible Flow Solutions, Proceedings of the XXIII Yugoslav Congress of Theoretical and Applied Mechanics, pp.167-170, Beograd, 2001
  12. Jovicic N., Milovanovic D., Babic M., Soulis J.V., A Multigrid Algorithm for Three-Dimensional Incompressible Turbulent Flows - part I: Numerical Method, Proceedings of the XXIII Yugoslav Congress of Theoretical and Applied Mechanics, pp.171-174, Beograd, 2001.
  13. Jovicic N., Milovanovic D., Babic M., Soulis J.V., Hydraulic Turbo machinery Performance Predication Using Numerical Simulation, ECCOMAS Computational Fluid Dynamics Conference 2001, Swansea, Wales, UK, 4-7 September, 2001.
  14. Milovanović D., Jovičić N., Babić M., Soulis J.V., A Multigrid Algorithm for Three-Dimensional Incompressible Turbulent Flows - part II: Application, Proceedings of the XXIII Yugoslav Congress of Theoretical and Applied Mechanics, pp.265-268, Beograd, 2001
  15. Jovičić N., Despotović M., Radivojević D., Milovanović D., Babić M., An Efficient Numerical Method for Simulation of 3D Turbulent Flow, 28. NSS HIPNEF 2002, 2-4. 10 2002, Vrnjačka Banja, 2002
  16. Jovičić N., Despotović M., Babić M., Milovanović D., Numerical Simulation of Turbo machinery Fluid Flow, 6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", TMT 2002, Neum, B&H, 18-22 September, 2002
Volume 14, Issue 11, Pages155 -169