ENTROPY GENERATION ANALYSIS IN ERROR ESTIMATION OF AN APPROXIMATE SOLUTION: A CONSTANT SURFACE TEMPERATURE SEMI-INFINITE CONDUCTIVE PROBLEM
Abstract
The integral solution of one-dimensional heat conduction in a semi-infinite wall with constant temperature at its surface has been reviewed and compared with the exact solution for three temperature profiles. Then, an entropy generation analysis has been carried out for all solutions. Introducing an average normalized entropy generation, the error of the integral solution is found to show values in the same order as the values calculated for the normalized entropy generation. Therefore, it can be concluded that when no exact solution is available for a similar problem, one can verify the error of the available approximate solutions simply by applying an entropy generation analysis on the problem.
Dates
- Submission Date2008-10-15
- Revision Date2008-10-25
- Acceptance Date2008-11-01
References
- Bejan, A., A Study of Entropy Generation in Fundamental Convective Heat Transfer, Trans. ASME, 101 (1979), 4, pp.718-725
- Bejan, A., Entropy Generation Minimization, CRC Press, Boca Raton, Fla., USA, 1996
- Fowler, A. J., Bejan, A., Correlation of Optimal Sizes of Bodies with External Forced Convection Heat Transfer, Int. Commun. in Heat and Mass Transfer, 21(1994), 1, pp. 17-27
- Shuja, S. Z., Zubair, S. M., Khan, M. S., Thermo Economic Design and Analysis of Constant Cross-Sectional Area Fins, J. Heat Mass Transfer, 34 (1999), 5, pp. 357-364
- Sahin, A. S., Second Law Analysis of Laminar Viscous Flow Through a Duct Subjected to Constant Wall Temperature, ASME J. Heat Transfer, 120 (1998), 1, pp.76-83
- Esfahani, J. A., Alizadeh, A., Thermodynamic Optimization of Geometry in Laminar Convective Heat Transfer through a Pipe with Constant Wall Temperature, Proceedings, First International Exergy, Energy and Environmental Symposium, Izmir, Turkey, 2003, pp. 77-83
- Walsh, E., Myose, R., Davies, M., A Prediction Method for the Local Entropy Generation Rate in a Transitional Boundary Layer with a Free Stream Pressure Gradient, Stokes Research Institute, ASME, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 2002, Vol. 3A, pp. 637-646
- Griffin, P. C., et al., The Effect of Reynolds Number, Compressibility and Free Stream Turbulence on Profile Entropy Generation Rate, ASME, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 2002, Vol. 5A, pp. 61-69
- Goodman, T. R., The Heat Balance Integral and its Application to Problems Involving a Change of Phase, Trans. ASME, 80 (1958), 2, pp.335-342
- Goodman, T.R., Heat Balance Integral Further Considerations and Refinement, J. Heat Transfer, 83c (1961), 1, pp. 83-86
- Goodman, T. R., Shea, J., The Melting of Finite Slabs, J. Appl. Mech., 32 (1960), 1, pp. 16-24
- Venkateshan, S. P., Solaiappan, O., Approximate Solution of Nonlinear Transient Heat Conduction in One Dimension, Heat Mass Transfer, 26 (1988), 2, pp. 229-233
- Venkateshan, S. P., Rao, V. R., Approximate Solution of Nonlinear Transient Heat Conduction in Cylindrical Geometry, Heat Mass Transfer, 26 (1991), 1, pp. 97-102
- Bejan, A., Thermodynamic of an Isothermal Flow: The Two-Dimensional Turbulent Jet, Int. J. Heat Mass Transfer, 34 (1991), 2, pp.407-413
- Esfahani, J. A., Jafarian, M., Entropy Generation Analysis of a Flat Plate Boundary Layer with Various Solution Methods, J. Iranica Scientia, 12 (2005), 2, pp. 233-240
- Esfahani, J. A., Roohi, E., Entropy Generation Analysis in Error Estimation of Approximate Solution Methods Implemented to Conductive Problem, Proceedings, 18th National and 7th ISHMT-ASME Heat and Mass Transfer Conference, IIT Guahati, India, 2006, pp. 832-839
- Hristov, J., Research Note on a Parabolic Heat-Balance Integral Method with Unspecified Exponent: An Entropy Generation Approach in Optimal Profile Determination, Thermal Science, 13 (2009), 2, pp. 49-59 (present issue)
- Poulikakos, D., Conduction Heat Transfer, Prentice Hall, New Jersey, USA, 1994
Volume
13,
Issue
2,
Pages133 -140