ANALYSIS OF THE ENERGETIC/ENVIRONMENTAL PERFORMANCES OF GAS TURBINE PLANT

Abstract

Zirconia stabilized with 8 wt.% Y2O3 is the most common material to be applied in thermal barrier coatings owing to its excellent properties: low thermal conductivity, high toughness and thermal expansion coefficient as ceramic material. Calculation has been made to evaluate the gains of thermal barrier coatings applied on gas turbine blades. The study considers a top ceramic coating Zirconia stabilized with 8 wt.% Y2O3 on a NiCoCrAlY bond coat and Inconel 738LC as substrate. For different thickness and different cooling air flow rates, a thermodynamic analysis has been performed and pollutants emissions (CO, NOx) have been estimated to analyse the effect of rising the gas inlet temperature. The effect of thickness and thermal conductivity of top coating and the mass flow rate of cooling air have been analysed. The model for heat transfer analysis gives the temperature reduction through the wall blade for the considered conditions and the results presented in this contribution are restricted to a two considered limits: (1) maximum allowable temperature for top layer (1200 °C) and (2) for blade material (1000 °C). The model can be used to analyze other materials that support higher temperatures helping in the development of new materials for thermal barrier coatings.

Dates

  • Submission Date2008-02-22
  • Revision Date2008-09-12
  • Acceptance Date2008-12-08

DOI Reference

10.2298/TSCI0901147I

References

  1. Bejan, A., Advanced Engineering Thermodynamics, 2nd ed., John Wiley & Sons, New York, USA, 1997
  2. Teixeira, V., et al., Effects of Deposition Temperature and Thermal Cycling on Residual Stress State in Zirconia-Based Thermal Barrier Coating, Surface and Coatings Technology, 120-121 (1999), Nov., pp. 103-111.
  3. DeMasi-Marcin, J. T., Gupta, D. K., Protective Coatings in the Gas Turbine Engine, Surface and Coatings Technology, 68-69 (1994), Dec., pp. 1-9
  4. Johner, G., Schweitzer, K. K. J., Flame Rig Testing of Thermal Barrier Coatings and Correlation with Engine Results, Journal of Vacuum Science & Technology, A: Vaccum, Surfaces, and Films, 3 (1985), 6, pp. 2516-2524
  5. Cernuschi, F., et al., Thermal Diffusivity/Microstructure Relationship in Y-PSZ Thermal Barrier Coatings, Journal of Thermal Spray Technology, 8 (1999), 1, pp. 102-109
  6. Risk, N. K., Mongia, H. C., Semianalytical Correlations for NOx, CO and UHC Emissions, Journal of Engineering for Gas Turbine and Power, 115 (1993), 3, pp. 612-619
  7. Clyne, T. W., Gill, S. C., Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work, Journal of Thermal Spray Technology, 5 (1996), 4, pp. 401-418
  8. Teixeira, V., et al., Failure in PVD-Plasma Spraying Thermal Barrier Coatings During Thermal Cycling, Proceedings (Ed. C. Berndt), 8th National Thermal Spray Conference, Houston, Tex., USA, 1995, pp. 515-520
  9. Chang, G., Phucharoen, W., Miller, R., Behavior of Thermal Barrier Coatings for Advanced Gas Turbine Blades, Surface and Coatings Technology, 30 (1987), 1, pp. 13-28
  10. Evans, A. G., He, M. Y., Hutchinson, J. W., Mechanics-Based Scaling Laws for the Durability of Thermal Barrier Coatings, Progress in Materials Science, 46 (2001), 3-4, pp. 249-271
  11. Evans, A. G., et al., Mechanisms Controlling the Durability of Thermal Barrier Coatings, Progress in Materials Science, 46 (2001), 5, pp. 505-553
  12. Thompson, J. A., Clyne, T. W., The Effect of Heat Treatment on the Stiffness of Zirconia Top Coats in Plasma-Sprayed TBCs, Acta Materialia, 49 (2001), 9, pp. 1565-1575
  13. Vassen, R., et al., New Materials for Advanced Thermal Barrier Coatings, Proceedings (Eds. J. Lecomte-Beckers, F. Schuber, P. J. Ennis), 6th Liége Conference on Materials for Advanced Power Engineering, Liége, Belgium, 1998, pp. 1627-1635
  14. Vassen, R., Stöver, D., Functional Gradient Materials and Surface Layers Prepared by Fine Particles Technology, Kluwer Academic Publishers, Dordrecht, The Netherlands, 2001, pp. 199-216
  15. Portinha, A., et al., Characterization of Thermal Barrier Coatings with a Gradient in Porosity, Surface and Coatings Technology, 195, (2005), 2-3, pp. 245-251
  16. Portinha, A., et al., Stabilization of ZrO2 PVD Coatings with Gd2O3, Surface and Coatings Technology, 188-189 (2004), Nov.-Dec., pp. 107-115
  17. Raghavan, S., et al., Thermal Properties of Zirconia Co-Doped with Trivalent and Pentavalent Oxides, Acta Materialia, 49 (2001), 1, pp. 169-179
  18. Nicholls, J. R., et al., Methods to Reduce the Thermal Conductivity of EB-PVD TBCs, Surface and Coatings Technology, 151-152 (2002), Mar., pp. 383-391
  19. Stöver, D., Funke, C., Directions of Developments, of Thermal Barrier Coatings in Energy Applications, Journal of Materials Processing Technology, 92-93 (1999), pp.195-202
  20. Siegel, R., Spuckler, C. M., Analysis of Thermal Radiation Effects on Temperatures in Turbine Engine Thermal Barrier Coatings, Materials Science and Engineering: A, 245 (1998), 2, pp. 150-159
  21. Campagnoli, E., Ruscica, G., Factors Affecting the Application of Coatings on Superalloys, High Temperatures - High Pressures, 31 (1999), 3, pp. 321-329
  22. Valero, A., et al., CGAM Problem: Definition and Conventional Solution, Energy, 19 (1994), 3, pp. 279-286
  23. Yunus, A. C., Michael, A. B., Thermodynamics: An Engineering Approach, 3rd ed., McGraw-Hill, New York, USA, 1998
  24. Cohen, H., Rogers, G. F. C., Saravanamuttoo, H. I. H., Gas Turbine Theory, 4th ed., Longman Group Ltd., UK, 1996
  25. Kotas, T. J., The Exergy Method of Thermal Plant Analysis, Butterworths, Academic Press, London, 1985
  26. Lazzaretto, A., Toffolo, A., Energy, Economy and Environment as Objectives in Multi-Criterion Optimization of Thermal Systems Design, Energy, 29 (2004), 8, pp. 1139-1157
  27. Aydin, O., et al., Theoretical Analysis of Heat Transfer through an Idealized Gas Turbine Blade Model with Thermal Barrier Coating, International Journal of Rotating Machinery, 8 (2002), 2, pp. 81-86
  28. Lefebvre, A. H., Gas Turbine Combustion, 2nd ed., CRC Press, Boca Ration, Fla., USA, 1998
  29. Bejan, A., Kraus A. D., Heat Transfer Handbook, John Wiley & Sons Inc., Hoboken, N. J., USA, 2003
Volume 13, Issue 1, Pages147 -164