GEOMETRIC OPTIMIZATION OF CROSS-FLOW HEAT EXCHANGER BASED ON DYNAMIC CONTROLLABILITY

Abstract

The operation of heat exchangers and other thermal equipments in the face of variable loads is usually controlled by manipulating inlet fluid temperatures or mass flow rates, where the controlled variable is usually one of the output temperatures. The aim of this work is to optimize the geometry of a tube with internal flow of water and an external cross-flow of air, based on its controllability characteristics. Controllability is a useful concept both from theoretical and practical perspective since it tells us if a particular output can be controlled by a particular input. This concept can also provide us with information about the easiest operating condition to control a particular output. A transient model of a tube in cross-flow is developed, where an implicit formulation is used for transient numerical solutions. The aspect ratio of the tube is optimized, subject to volume constraints, based on the optimum operation in terms of controllability. The reported optimized aspect ratio, water mass flow rate and controllability are studied for deferent external properties of the tube.

Keywords

Dates

  • Submission Date2007-11-11
  • Revision Date2008-03-09
  • Acceptance Date2008-07-17

DOI Reference

10.2298/TSCI0802075A

References

  1. Bejan, A., Entropy Generation Minimization, CRC Press, Boca Raton, Fla., USA, 1996
  2. Alebrahim, A., Bejan, A., Entropy Generation Minimization in a Ram-Air Cross-Flow Heat Exchanger, Int. J. Applied Thermodynamics, 2 (1999), 4, pp. 145-157
  3. Sekulic, D. P., Entropy Generation in a Heat Exchanger, Heat Transfer Engineering, 7 (1986), 1-2, pp. 83-88
  4. Alotaibi, S., et al., Controllability of Cross-Flow Heat Exchangers, Int. J. Heat Mass Transfer, 47 (2004), 5, pp. 913-924
  5. Antsaklis, P. J., Michel, A. N., Linear Systems, McGraw-Hill, New York, USA, 1997
  6. Butkovsky, A. G., Distributed Control System, Elsevier, Amsterdam, The Netherlands, 1969
  7. Klamka, J., Controllability of Dynamical Systems, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1991
  8. Vargra, E. I., Hangos, K. M., Szigeti, F., Controllability and Observability of Heat Exchangers Networks in the Time-Varying Parameter Case, Control Engineering Practice, 3 (1995),10, pp. 1409-1419
  9. Kequn, L., Xing, L., Niemeyer, B., Controllability Analysis of Multistream Heat Exchangers, Proceedings, International Symposium on Compact Heat Exchangers, Grenoble, France, 2002, pp. 163-167
  10. Alotaibi, S., et al., Numerical Simulation of the Thermal Control of Heat Exchangers, Numerical Heat Transfer A, 41 (2002), 3, pp. 229-244
Volume 12, Issue 3, Pages75 -84