APPLICATION OF UPWARD FLAME SPREAD FOR THE PREDICTION OF SBI AND ISO ROOM CORNER (and parallel wall) EXPERIMENTS AND CLASSIFICATION

Abstract

The flammability hazard assessment of wall and ceiling linings has occupied the attention of fire scientists and engineers and regulators over the last fifty years. Several tests (small, medium, and large) have been developed to classify the flammability of linings and predict their burning behaviour in real enclosure fire situations. We examine in some detail three such efforts: (a) the development of an experimental room and a 9 ft vertical wall full scale test by Ferris leading to the Early Fire Hazard test in Australia, (b) the ISO room corner test, and (c) The new SBI (Single Burning Item test) which maybe the most thoroughly examined test in the history of flammability testing. Of these tests, the experimental room used by Ferris and the ISO room corner test may be considered as end use applications for medium size rooms whereas the SBI test and the vertical wall test by Ferris are intermediate scale test designed to represent the room fire behaviour in a more controlled way. Performance criterion in the ISO room corner test is the time to reach flashover. Performance criteria in the SBI test are related to the fire growth in an open corner (no ceiling) configuration due to upward flame spread. Performance criterion in the experimental room of Ferris was the time to reach untenable conditions in the room. Finally, performance criterion in the vertical wall of Ferris was the time interval from ignition until the flames reach the top of the wall. Examination of all these efforts has led to consistently validating a new correlation of the performance criteria of these tests with small-scale cone calorimeter tests whenever both data are available. Previous correlations are also discussed. The new correlation compares well with essential features of upward flame spread as this is related to flammability properties. Comparison between the ISO room corner test and the SBI test leads to suggestions regarding the suitability of these tests as a regulatory tool. Some comments are also directed towards a new test method of parallel wall panels recently proposed by Fmglobal. This test method can be analyzed using the same methodology outlined in this paper.

Keywords

Dates

  • Submission Date2006-12-20
  • Revision Date2007-02-12
  • Acceptance Date2007-03-29

DOI Reference

10.2298/TSCI0702007D

References

  1. ***, CIB Working with the Performance Approach in Building, CIB Report 64, 1982
  2. Ferris , J. E., Fire Hazards of Combustible Walboards, Special Report No. 18, Commonwealth Experimental Building Station, 1955
  3. ***, ISO: Fire-Tests Full-Scale Room Test for Surface Products, ISO 9705, ISO Geneva, 1993a
  4. ***, Proceedings, International EURIFIC Seminar, Copenhagen, 1991, Interscience Communications Limited, London, 1992
  5. Saito, K, Quintiere, J. G., Williams, F. A., Upward Turbulent Flame Spread, Proceedings (Eds. C. E. Grant, P. J. Pagni), 1st International Symposium on Fire Safety Science, Hemisphere Publishing Corporation, New York, 1986, pp. 75-86
  6. Delichatsios, M. A., Saito, K., Upward Fire Spread, Key Flammability Properties, Similarity Solutions and Flammability Indices, Proceedings, 3rd International Symposium, on Fire Safety Science (Eds. G. Cox., B. Langford), Elsevier Science Publishers Ltd, London, 1991, pp. 217-226
  7. Beyler, C., L , Hunt, S. P., Ibqal, N., Williams, F. W., A Computer Model of Upward Flame Spreda on Vertical Surfaces, Proceedings, 5th International Symposium on Fire Safety Science, Melbourne, Australia, 1997, pp. 297-308
  8. Karlsson, B., Modeling Fire Growth on Combustible Lining Materials in Enclosures, Report TVBB-1009, Department of Fire Safety Engineering, Lund University, Lund, Sweden, 1992
  9. Kokkala, M. A, Thomas, P. H., Karlsson, B., Rate of Heat Release and Ignitability Indices for Surface Linings, Fire and Materials, 17 (1993), 5, pp. 209-216
  10. Hakkarainen, T., Kokkala, M. A., Application of a One-Dimensional Thermal Flame Spread Model on Predicting the Rate of Heat Release in the SBI Test, 2000, Fire and Materials, 25 (2001), 2, pp. 61-70
  11. Delichatsios, M. A., Flame Heat Fluxes and Correlations of Upward Flame Spread Along Vertical Cylinders in Various Oxygen Environments, Proceedings, 28ht Symposium (Int.), on Combustion, 2000, The Combustion Institute Pittsbourgh, Pa., USA, 2001, p. 2899
  12. Quintiere, J. G., A Simulation Model for Fire Growth on Materials Subject to a Room-Corner Test, Fire Safety Journal, 20 (1993), 4, pp. 313-339
  13. DeRis, J. L., Orloff, L., Flame Heat Transfer Between Parallel Panels, Proceedings, 8th International Symposium on Fire Safety Science, Beijing, 2005, pp. 999-1010
Volume 11, Issue 2, Pages7 -22