PRODUCTION AND CHARACTERISATION OF BIO-OIL FROM CATALYTIC BIOMASS PYROLYSIS
Abstract
Biomass flash pyrolysis is a very promising thermochemical process for the production of bio-fuels and/or chemicals. However, large-scale applications are still under careful consideration, because of the high bio-liquid upgrading cost. In this paper the production of bio-liquids from biomass flash pyrolysis in a single stage catalytic process is being investigated using a novel once through fluid bed reactor. This biomass pyrolysis unit was constructed in CPERI and comprises of a catalyst regenerator, a biomass-vibrating hopper, a fluidization reactor (that consists of an injector and a riser reactor), a product stripper along with a hot cyclone and a filter housing and finally a product condensation/recovery section. The unit can process up to 20 gr/min of biomass (50-800µm) and can circulate up to 300 gr/min of catalyst or inert material. The experiments performed in the pilot plant showed that the unit operates without problems and with satisfactory mass balances in a wide range of experimental conditions both in the absence and presence of catalyst. With the incorporation of an FCC catalyst in the pyrolysis, the physical properties of the bio-oil produced changed, while more stable bio-oil was produced.
Dates
- Submission Date2005-10-07
- Revision Date2006-11-11
References
- Scott, D.S. & Piskorz, J. Canadian Journal of Chemical Engineering, 62(1984), pp.404-412.
- Scott, D.S., Piskorz, J. & Radlein, D. Industrial Engineering Chemical Process Design and Development, 24(1985), pp.581-588.
- Samolada, M.C. (1992) PhD Thesis, Aristotle University of Thessaloniki.
- Samolada, M.C., Baldauf, W. & Vasalos, I.A. Production of a bio-gasoline by upgrading biomass flash pyrolysis liquids via hydrogen processing and catalytic cracking, Fuel, 77(1998), pp.1667-1675.
- Scott, D.S., Majerski, P., Piskorz, J. & Radlein, D. A second look at fast pyrolysis of biomass - the RTI process. Journal of Analytical Applied Pyrolysis, 51(1999), pp.23-37.
- Diebold, J., Power, A. Research in thermochemical biomass conversion. In: Bridgwater AV, Kuester J, ed. Proceedings of the International Conference, Phoenix, Arizona, USA. Amsterdam, Elsevier(1988).
- Rejai, B., Evans, R.J., Milne, T.A., Diebold, J.P., Scahill, J.W. In: Proceedings of the Energy from biomass and wastes XV. Washington DC, 25-29 March(1991).
- Wagenar, B.M., Venderbosch, R.H., Carrasco, J., Strenziok, R., Aa, B.J. (2000) In: Proceedings of the Progress in Thermochemical Biomass Conversion. Tyrol, Austria, 17-22 September.
- Freel, A.B., Graham, R.G. Apparatus for a circulating bed transport fast pyrolysis reactor system. US Patent 5,961,786(1999).
- Roy, C., Caumia, B., Pakdel, H., Plante, P., Blanchette, P., Labrecque, BIn: Hogan, E., Robert, J., Grassi, G., Bridgwater, A.V. ed. Proceedings of the First Canada/EC R&D Contractors Meeting, Ottawa, Canada., pp.109-122 (1990).
- Bridgewater, A.V., Peacocke, G.V.C. Fast Pyrolysis Processes for Biomass. Renewable Sustainable Energy Reviews, 4(2000), pp.1-73.
- Islam M. N. and Beg M. R. A., The fuel properties of pyrolysis liquid derived from urban solid wastes in Bangladesh, Bioresource Technology, Volume 92, Issue 2, (2004), pp. 181-186
- Nokkosmäki M. I., Kuoppala E. T., Leppämäki E. A. and Krause A. O. I. , Catalytic conversion of biomass pyrolysis vapours with zinc oxide, Journal of Analytical and Applied Pyrolysis, 55, Issue 1, (2000), pp.119-131
- Lappas, A.A., Samolada, M.C., Iatridis, D.K., Voutetakis, S.S., Vasalos, I.A. Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals, Fuel, 81(2002), pp. 2087-2095.
- Oasmaa A. and Meier D., Norms and standards for fast pyrolysis liquids: 1. Round robin test, Journal of Analytical and Applied Pyrolysis, Journal of Analytical and Applied Pyrolysis, Volume 73, Issue 2, (2005), pp. 323-334
- Radovanovic M., Venderbosch R. H., Prins W. and Van Swaaij W. P. M., Some remarks on the viscosity measurement of pyrolysis liquids, Biomass and Bioenergy, Volume 18, Issue 3, (2000), pp. 209-222
Volume
10,
Issue
3,
Pages151 -160