SLAGGING AND FOULING IN BIOMASS CO-COMBUSTION

Abstract

Deposits formation on heat transfer surfaces, namely slagging and fouling, is one of the main problems associated to biomass combustion. Reducing deposits formation can optimise plant operation. Literature review and experience show a clear research demand towards methods for on line detection of deposits in large-scale boilers. A system consisting of a monitoring model and an on-line measurement method is presented. Results of testing campaigns show the appropriateness of the model to visualise deposit tendencies, and the possibility to determine the influence of ash deposits on heat transfer using the measurement method.

Dates

  • Submission Date2005-02-17
  • Revision Date2005-06-25
  • Acceptance Date2005-08-31

References

  1. Couch, G., Understanding slagging and fouling during pf combustion, IEA Coal Research, No. IEZCR/72, 1994
  2. Cortes C., Slagging in utility boilers firing low rank coals. Analysis, detection and preventive operating strategies, Ph. D. thesis, University of Zaragoza, Spain, 1991
  3. Bryers, R.W., Fireside slagging, fouling and high temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels, Progress in Energy and Combustion Science, 22 (1996), pp. 29-120
  4. Bryers, R.W., Ash deposits and corrosion due to impurities in combustion gases, Proceedings of the international conference, Henniker, New Hampshire, June-July 1977. Hemisphere, Washington, 1978
  5. Raask, E., Mineral Impurities in Coal Combustion. Hemisphere, Washington, 1985
  6. Isdale, J.D., Debate on gas-side fouling, Fouling Science and Technology, (1988), pp. 731-733
  7. Visser, J., Adhesion and removal of particles I, Fouling Science and Technology,(1988), pp. 87-104
  8. Howarth, J., Bott, T.R., High temperature fouling: The nature of deposits, Fouling Science and Technology, (1988), pp. 679-700
  9. Corrieu, G., On-line measurement of fouling and cleaning of industrial UHT exchangers, Fouling Science and Technology, (1988), pp.575-587
  10. Tsados, A., Bott, T.R., High temperature gas-side fouling case study, , Fouling Science and Technology, (1988), pp. 701-712
  11. Bott, T.R., Gas side fouling, Fouling Science and Technology, (1988), pp. 191-203
  12. Baxter, L L., Ash deposition during biomass and coal combustion: a mechanistic approach, Biomass and Bioenergy, 4 (1993), 2, pp. 85-102
  13. Rezaei, H.R., et al., Modelling the initial structure of ash deposits and structure changes due to sintering, Impact of mineral impurities in solid fuel combustion, Gupta et al. Kluwer Academic/ Plenum Publishers, New York, 1999
  14. Sami, M., et al. M., Co-firing of coal and biomass fuel blends, Progress in Energy and Combustion Science, 27 (2001), pp. 171-214
  15. Jenkins, B.M., et al., Combustion properties of biomass, Fuel Processing Technology, 54 (1998), pp. 17-46
  16. Unterberger, S., Lopez, C., Hein, K.R.G., EU-Project Prediction of Ash and Dep. Formation for Biomass p.f. Co-Combustion, Power Production in the 21st Century: Impacts of Fuel Quality and Operations, Engineering Foundation Conference, Utah, 2001.
  17. Miles, T.R., et al., Boiler deposits from firing biomass fuels, Biomass and Bioenergy, 10 (1996), 2-3, pp125-138
  18. Garret, B.A., A brief overview of gas-side fouling, Fouling of heat exchangers, Noyes Publication, New York, 1985
  19. Kiel, J.H.A., Coal ash behavior in reducing environments (CABRE), ECN-NOVEM, the Netherlands, 1999
  20. Robinson, A.L., et al., In situ measurements of the thermal conductivity of ash deposits formed in a pilot-scale combustor, Impact of mineral impurities in solid fuel combustion, Gupta et al. Kluwer Academic/ Plenum Publishers, New York, 1999
  21. Robinson, A.L., et al., Experimental measurements of the thermal conductivity of ahs deposits: Part 1. Measurement technique, Energy and Fuels, 15 (2001), pp. 66-74
  22. Heinzel, T., et al., Investigation of slagging in pf co-combustion of biomass and coal at a pilot-scale test facility, Fuel Processing Technology, 54 (1998), pp. 109-125
  23. Heinzel, T., et al., Evaluation of biomass combustion in a cyclone slag tap furnace, IVD Stuttgart, 1998, Stuttgart, Germany
  24. Zevenhoven-Onderwater, M., et al., The prediction of behavior of ashes from five different solid fuels in fluidized bed combustion, Fuel, 79 (2000), pp. 1353-1361
  25. Gupta, R.P., et al., Computer-controlled scanning electron microscopy of minerals in coal-implications for ash deposition, Progress in Energy and Combustion Science, 24 (1998), pp. 523-543
  26. Beek, M.C., et al., Gas-side Fouling in Heat-Recovery Boilers, Ph.D. thesis, TU Eindhoven, Eindhoven, The Netherlands, 2001
  27. Huang, L.Y., et al., Prediction of ash deposits on superheater tubes from pulverized coal combustion, Fuel, 75 (2000), pp. 271-279
  28. Yan, L., Gupta, R.P., Wall, T.F., A mathematical model of ash formation during pulverized coal combustion, Fuel, 81 (2002), 3, pp. 337-344
  29. Ahnert, F., et al., Dynamic modeling of heat exchangers in biomass fired systems, 4th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Florence, May, 2001
  30. Garret, B.A., et al., Heat exchanger design for gas-side fouling service, Fouling of Heat Exchangers, Noyes Publication, USA, 1985.
  31. Valero, A., Cortes C., Ash fouling in coal-fired utility boilers. Monitoring and optimization of on-load cleaning, Progress in Energy and Combustion Science, 22 (1996), pp 189-200
  32. Rezaei, H.R., et al., Thermal conductivity of coal ash and slags, models used, Fuel, 79 (2000), pp 1697-1710
  33. Baxter, L.L., Influence of ash deposit chemistry and structure on physical and transport properties, Fuel Processing Technology, 56 (1998), pp. 81-88
  34. Robinson, A.L., et al., Experimental measurements of the thermal conductivity of ahs deposits: Part 2. Effects of sintering and deposit microstructure, Energy and Fuels, 15 (2001), pp. 75-84
  35. Robinson, A.L., et al., Experimental measurements of the thermal conductivity of ahs deposits: Part 1. Measurement technique, Energy and Fuels, 15 (2001), pp. 66-74
  36. Baxter, L.L. et al., In Situ, Real-Time characterisation of coal ash deposits using Fourier transform infrared emission spectroscopy, Energy and Fuels, 7 (1993), pp. 755-760
  37. Derichs, W., et al., Optical measurements to predict slagging in Power Plant boilers (in German language), VGB, Komet 650, 1999, Germany
  38. Baxter, L. et al., Surface temp., emissivity and chemical comp. sensor, Proposal for Vision21 Systems, 2000, Utah, US
  39. Huang, L.Y., et al., Prediction of ash dep. on superheater tubes from p.c. comb., Fuel, 75 (2000), pp. 271-279
  40. Patankar S.V., Numerical heat transfer and fluid flow, Hemisphere, Washington D.C., 1980.
  41. Kikstra, J.F., Modelling, design and control of a cogenerating nuclear gas turbine plant, Ph.D. Thesis, TU Delft, Delft, The Netherlands, 2001
Volume 9, Issue 3, Pages85 -98